Monday, March 31, 2014

~ Advertising Services~

I have decided to start advertising
If your interested drop me an email
Hugs
Beth-Ann

Garden Critters

*Click tag to see  full size*

**This Tutorial was written By Me On March 31, 2014
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am using Grandma's Garden ~ HERE
Mask #18 By Millie ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Awesome art of Toosh Toosh
And can be be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Beautiful PTU Scrapkit Spring Keira By Amy Marie's Scraps
And can be found  ~ HERE
Thank you Amy Marie for making such amazing kits for us to create with.

*Cluster Set*
And the matching PTU Cluster set by Tracy S
And these can also be found in Amy Marie's Store ~ HERE

*NOTES*
Always remember to duplicate your tube and close original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement


Ok this will be a fairly quick tutorial but just as fun I hope
We will be using a ready made cluster and adding some goodies from the matching kit, so let your imagination run wild, thats always fun :)

*Let's Get Started*
Open Cluster 1 duplicate and close original then  image canvas size 725x725 add new layer and send to the bottom floodfill with white.
Open your freehand selection  tool and select over the top frame c/p paper 17 as a new layer resize by 70% invert/delete/invert again move the mask layer over the paper arrange invert/delete/deselect and move below the frame.
Open tube c/p resize to desired size arrange on top of the tree stump now duplicate guassian blur 3.00 and change the blend mode to soft light and add d/s to original tube layer.
Duplicate Raster 3 2 times and arrange so the grass patch is a bit bigger
Resize Raster 14 by 95% and move to the left of the tag
~Time to add the elements I used the following~
Open 25 - c/p resize by 25% , c/p again resize by 20%
Open 26 - c/p resize by 20%
Open 29 - c/p resize by 30%
Open 50 - c/p resize by 50% and arrange between the frame and paper layer
Open 52 - c/p resize by 30% and arrange in between the frame and paper layer
Open 38 - c/p resize by 40% and arrange between the frame and paper layer behind the fern
Open 24 - c/p resize by 25%
Open 45 - c/p resize by 25%
Open 54 - c/p resize by 35%
Open 99 - c/p arrange behind tube layers
Add anymore elements you wish and a dropshadow to each.
When your happy with your tag close off your white background layer and merge visable
Select all Add new layer open paper 1 c/p into selection apply mask/merge group duplicate/merge down resize by 105%.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!

~Thank You for trying my tutorial, I hope you found it fun and easy to follow~

Spring Witch

*Click tag to see  full size*

**This Tutorial was written By Me On March 31, 2014
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am using Dandelion In The Spring ~ HERE
Big Mask #1 by Vix ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Awesome art of Caron Vinson
This tube was purchased at CILM when they were open
And can be be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Beautiful PTU Scrapkit Spring Kiera By Amy Marie's Scraps
And can be found  ~ HERE
Thank you Amy Marie for making such amazing kits for us to create with.

*Cluster Set*
And the matching PTU Cluster set by Tracy S.
And these can also be found in Amy Marie's Store ~ HERE

*NOTES*
Always remember to duplicate your tube and close original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement


Ok this will be a fairly quick tutorial but just as fun I hope
We will be using a ready made cluster and adding some goodies from the matching kit, so let your imagination run wild, thats always fun :)

*Let's Get Started*
Open Cluster 2 duplicate and close original then  image canvas size 725x725 add new layer and send to the bottom floodfill with white.
Open your rectangle selection  tool and select over the top frame c/p paper 17 as a new layer resize by 80% invert/delete/invert/delete/deselect and move below the frame.
Open tube c/p resize to desired size arrange now duplicate guassian blur 3.00 and change the blend mode to soft light and add d/s to original tube layer.
Now highlight Raster 3 the grass layer duplicate at least 3 more times and arrange so you have a nice patch of grass for the tube to sit on then merge them all together, and move Raster 14 over by the big mushroom house.
~Time to add the elements I used the following~
Open 69 - c/p resize by 60% and arrange between the frame and paper layer duplicate/mirror
Open 45 - c/p resize by 25% and arrange her on the fence
Open 41 - c/p resize by 35%
Open 29 - c/p resize by 30%
Open 26 - c/p resize by 25% and arrange behind the tube
Open 99 - c/p arrange between frame and paper layer
Open 20 - c/p resize by 30%
Open 32 - c/p resize by 20%
Add anymore elements you wish and a dropshadow to each.
When your happy with your tag close off your white background layer and merge visable
Select all Add new layer open paper 17 c/p into selection apply mask/merge group duplicate/merge down resize by 105%.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!

~Thank You for trying my tutorial, I hope you found it fun and easy to follow~

Saturday, March 29, 2014

Spring Song

*Click tag to see  full size*

**This Tutorial was written By Me On March 29, 2014
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am using Inspration ~ HERE
 It is a PTU font but any Scripty font will work
Template # 549 by Millie ~ HERE
Mask #21 by Gem ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Awesome art of Ninaste of Beehive Studios
This tube is part of the New Bunny Girls Pack and is called Bunny Bug
And can be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Beautiful PTU Scrapkit Spring Song By Tiny Turtle Designs
This is one kit in an awesome bundle 
And can be found  ~ HERE
Thank you Laura for making such amazing kits for us to create with.

*NOTES*
Always remember to duplicate your tube and close original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
Open template duplicate and close original delete credits and layers 7 & 8 . Then image canvas size 650x675 and floodfill the background layer with white.
Raster 1  - Select all/float/defloat open paper 9 c/p resize by 80% invert/delete/invert again now open your tube make sure it is the very top layer c/p resize, if you are using the same tube as I am I resize it by 55%, arrange then invert/ then erase just the bottom part of the tube deselect and delete template layer,X out the tube for now we will be coming back to it later.
Raster 2 & 3 - Merge together, select all/float/defloat add new layer open paper 30 c/p into selection deselect and delete template layer.
Raster 4 - Select all/float/defloat new layer open paper 21 c/p into selection deselect and delete template layer.
Raster 5 & 6 - Merge together select all/float/defloat new layer open paper 25 c/p into selection deselect and delete template layer.
Now back to the tube, duplicate Gussian Blur 3.00 and change the blend mode to soft light and add d/s to original tube layer.
*Now Time To Add The Elements*
Element 23 - c/p arrange behind tube layer and add a slight d/s
Element 79 - c/p resize by 95%
Element 61 - c/p resize by 30% duplicate/mirror
Element 84 - c/p resize by 35%
Element 119 - c/p reszie by 35% rotate with pick tool, duplicate/mirror
Element 125 - c/p resize by 40% duplicate/mirror
Element 78 - c/p resize by 30%
Element 12 - c/p resize by 45% arrange duplicate and resize again by 80%
Element 21 - c/p resize by 45% duplicate/mirror
Element 76 - c/p resize by 40%
Element 2 - c/p resize by 50%
Add anymore elements you wish and a dropshadow to each.
When your happy with your tag close off your white background layer and merge visable.
Select all Add new layer open paper 14 c/p into selection apply mask/merge group duplicate.
Merge visable then resize as desired.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!

~Thank You for trying my tutorial, I hope you found it fun and easy to follow~

Candles Easter

*Click tag to see  full size*

**This Tutorial was written By Me On March 28, 2014
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am using Nightmare Before Christmas ~ HERE
Mask #72 by Vaybs ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Awesome art of Derzi of Beehive Studios
This tube is Candles-Snow but this layer is Candles Easter
And can be be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Beautiful PTU Scrapkit Candles Easter By Amy Marie's Scraps
And can be found  ~ HERE
Thank you Amy Marie for making such amazing kits for us to create with.

*Cluster Set*
And the matching PTU Cluster set by Chillipepper Spiced
And these can also be found in Amy Marie's Store ~ HERE

*NOTES*
Always remember to duplicate your tube and close original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement


Ok this will be a fairly quick tutorial but just as fun I hope
We will be using a ready made cluster and adding some goodies from the matching kit, so let your imagination run wild, thats always fun :)

*Let's Get Started*
Open Cluster 2 duplicate and close original then  image canvas size 725x725 add new layer and send to the bottom floodfill with white.
Open your rectangle selection  tool and select over the top frame c/p paper 3 as a new layer resize by 75% invert/delete/invert again move the mask layer over the paper arrange invert/delete/deselect and move below the frame.
Open tube c/p resize to desired size arrange now duplicate guassian blur 3.00 and change the blend mode to overlay and add d/s to original tube layer.
~Time to add the elements I used the following~
Open 4 - c/p resize by 30% and tuck behind raster 9
Open 30 - c/p resize by 30% and arrange in top of the fence
Open 44 c/p arrange above the original grass layer
Open 43 - c/p resize by 70% arrange behind raster 10
Open 46 - c/p free rotate 90 all layers uncheckd and move below the frame
Open 6 - c/p resize by 80% arrange above the white background layer
Open 45 - c/p and arrange behind tube layers
Add anymore elements you wish and a dropshadow to each.
When your happy with your tag close off your white background layer and merge visable
Select all Add new layer open paper 14 c/p into selection apply mask/merge group duplicate/merge down resize by 85%.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!

~Thank You for trying my tutorial, I hope you found it fun and easy to follow~

Thursday, March 27, 2014

Miss Ladybug

*Click tag to see  full size*

**This Tutorial was written By Me On March 27, 2014
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am using Cinnimon Cake ~ HERE
Mask #18 By Millie ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Awesome art of Alicia Mujica
This tube is Exclusive to CDO
And can be be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Beautiful PTU Scrapkit Ladybug Garden By Amy Marie's Scraps
And can be found  ~ HERE
Thank you Amy Marie for making such amazing kits for us to create with.

*Cluster Set*
And the matching PTU Cluster set by Chillipepper Spiced
And these can also be found in Amy Marie's Store ~ HERE

*NOTES*
Always remember to duplicate your tube and close original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement


Ok this will be a fairly quick tutorial but just as fun I hope
We will be using a ready made cluster and adding some goodies from the matching kit, so let your imagination run wild, thats always fun :)

*Let's Get Started*
Open Cluster 1 duplicate and close original then  image canvas size 725x725 add new layer and send to the bottom floodfill with white and delete the mask layer as we will be adding a different mask later.
Open your rectangle selection  tool and select over the top frame add new layer c/p paper 15 into selection  and move below the frame.
Open tube c/p  arrange above the frame now duplicate guassian blur 3.00 and change the blend mode to screen and add d/s to original tube layer.
~Time to add the elements I used the following~
Open 130  - c/p arrange above the frame
Open 36 - c/p resize by 75% and adjust with your pick tool to make smailler height wise and move behind the grass and raster 7
Open 28 - c/p resize by 35%
Open 76 - c/p resize by 30%
Open 73 - c/p resize by 35%
Open 2 - c/p resize by 65% arrange below raster 7 duplicate/mirror and resize again by 85% and tuck behind the rain boots
Open 35 - c/p resize by 16% arrange duplicate/mirror then duplicate again
Open 27 - c/p resize by 60%
Open 125 - c/p make sure this is your very top layer and arrange over the bottom of the tag
Add anymore elements you wish and a dropshadow to each.
When your happy with your tag close off your white background layer and merge visable
Select all Add new layer open paper 19 c/p into selection apply mask/merge group duplicate/merge down.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!

~Thank You for trying my tutorial, I hope you found it fun and easy to follow~

Ladybug Garden

*Click tag to see  full size*

**This Tutorial was written By Me On March 27, 2014
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am using Dandelion In The Spring ~ HERE
Big Mask #1 by Vix ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Awesome art of Suzanne Woolcott
Sadly she is not selling tubes any longer
But her other art can be viewed  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Beautiful PTU Scrapkit Ladybug Garden By Amy Marie's Scraps
And can be found  ~ HERE
Thank you Amy Marie for making such amazing kits for us to create with.

*Cluster Set*
And the matching PTU Cluster set by Chillipepper Spiced
And these can also be found in Amy Marie's Store ~ HERE

*NOTES*
Always remember to duplicate your tube and close original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement


Ok this will be a fairly quick tutorial but just as fun I hope
We will be using a ready made cluster and adding some goodies from the matching kit, so let your imagination run wild, thats always fun :)

*Let's Get Started*
Open Cluster 2 duplicate and close original then  image canvas size 725x725 add new layer and send to the bottom floodfill with white, delete the mask layer we will be adding another mask later.
Open your rectangle selection  tool and select over the top frame open paper 11 c/p resize by 75%  arrangeinvert/delete/deselect and crop to remove any excess.
Open tube c/p make sure this is your very top layer resize by 90% and arrange so she is sitting on the rocks now duplicate guassian blur 3.00 and change the blend mode to screen and add d/s to original tube layer.
~Time to add the elements I used the following~
Open 130 - c/p arrange above the white background layer duplicate about 4 times and arrange so you have anice patch of grass
Open 2 - c/p resize by 80% 
Open 49 - c/p resize by 50%
Open 1 - c/p resize by 80% and tuck between the grass and fence
Open 46 - c/p resize by 55%
Open 28 - c/p resize by 35%
Open 67 - c/p resize by 30% and arrange behind raster 4
Open 40 - c/p resize by 15% duplicate/mirror
Open 36 - c/p resize by 60% and arrange behind the basket of apples and erase any part that shows past the tube
Open 30 - c/p resize by 15% duplicate/mirror
Open 9 - c/p resize by 55%
Open 76 - c/p resize by 30%
Add anymore elements you wish and a dropshadow to each.
When your happy with your tag close off your white background layer and merge visable
Select all Add new layer open paper 14 c/p into selection apply mask/merge group duplicate/merge down.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!

~Thank You for trying my tutorial, I hope you found it fun and easy to follow~

Tuesday, March 25, 2014

*CT* PTU Cluster Set "Bell" and Tag

I have a brand new CT PTU Cluster Set using the Stunningly Beautiful Scrap Kit
"Bell" 
By Tiny Turtle Designs
This kit comes jam packed and in beautiful Browns, Reds, Golds and Black
You can find this and all of her wonderful kits at her store




Monday, March 24, 2014

Spring Is Here

*Click tag to see  full size*

**This Tutorial was written By Me On March 24, 2014
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am using 2Peas Blueberry Pie ~ HERE
Big Mask #1 By Vix ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Awesome art of Karen Middleton
And can be be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Beautiful PTU Scrapkit Spring Is Here By Amy Marie's Scraps
And can be found  ~ HERE
Thank you Amy Marie for making such amazing kits for us to create with.

*Cluster Set*
And the matching PTU Cluster set by Chillipepper Spiced
And these can also be found in Amy Marie's Store ~ HERE

*NOTES*
Always remember to duplicate your tube and close original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement


Ok this will be a fairly quick tutorial but just as fun I hope
We will be using a ready made cluster and adding some goodies from the matching kit, so let your imagination run wild, thats always fun :)

*Let's Get Started*
Open Cluster 2 duplicate and close original then  image canvas size 725x725 add new layer and send to the bottom floodfill with white and delete the mask layer as we will be adding a different mask and delete raster 9 we will be adding a different bunny.
Open your rectangle selection tool and select over the frame open paper 13 c/p resize by 75% arrange down so more sky than grass shows invert/delete/deselect and move below the frame and crop to remove excess .
Open tube c/p  arrange above the frame now duplicate guassian blur 3.00 and change the blend mode to overlay and add d/s to original tube layer.
Duplicate Copy Of Raster 3 and arrange so we have a pigger patch of grass
Select raster 2 resize by 75%
~Time to add the elements I used the following~
Open 114 - c/p resize by 50% and arrange behind raster 3
Open 127 - c/p resize by 45% mirror and arrange behind the frame layer 
Open 74 - c/p resize by 60% and arrange behind copy of raster 3
Open 79 - c/p resize by 60% and arrange with 74
Open 73 - c/p resize by 60% mirror
Open 118 - c/p resize by 45%
Open 109 - c/p resize by 65% mirror and arrange behind tube
Open 44 - c/p resize by 50% arrange behind tube
Open 115 - c/p resize by 45% and arrange between the frame and paper layer
Open 112 - c/p resize by 35%
Open 102 - c/p resize by 25% duplicate/mirror
Add anymore elements you wish and a dropshadow to each.
When your happy with your tag close off your white background layer and merge visable
Select all Add new layer open paper 13 c/p into selection apply mask/merge group resize by 95%.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!

~Thank You for trying my tutorial, I hope you found it fun and easy to follow~

Wednesday, March 19, 2014

Bunny Girl

*Click tag to see  full size*

**This Tutorial was written By Me On March 19, 2014
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am using Harvey ~ HERE
Mask #18 by Millie ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Awesome art of Ellie Milk
And can be be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Beautiful PTU Scrapkit Bunny By Amy Marie's Scraps
And can be found  ~ HERE
Thank you Amy Marie for making such amazing kits for us to create with.

*Cluster Set*
And the matching PTU Cluster set by Chillipepper Spiced
And these can also be found in Amy Marie's Store ~ HERE

*NOTES*
Always remember to duplicate your tube and close original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement


Ok this will be a fairly quick tutorial but just as fun I hope
We will be using a ready made cluster and adding some goodies from the matching kit, so let your imagination run wild, thats always fun :)

*Let's Get Started*
Open Cluster 1 duplicate and close original then  image canvas size 725x725 add new layer and send to the bottom floodfill with white and delete the mask layer as we will be adding a different mask.
Open your freehand selection  tool and select over the frame open 19 c/p into selection do not deselect deselect and move below the frame now open your tube c/p resize as desired and arrange invert/delete/deselect, now crop to remove excess, duplicate Guassian Blur 3.00 and change the blend mode to Overlay and on the original tube layer change the blend mode to Lumiance(L) and add d/s .
Open main tube c/p  arrange above the frame now duplicate guassian blur 3.00 and change the blend mode to soft light and add d/s to original tube layer.
~Time to add the elements I used the following~
Open 98 - c/p arrange above the frame duplicate and arrange just so the grass looks fuller
Open 104 - c/p resize by 55% arrange behind the frame duplicate/mirror
Open 96 - c/p resize by 65% and arrange behind main tube
Open 11 - c/p resize by 45% duplicate/mirror
Open 7 - c/p resize by 30%
Open 47 - c/p resize by 30% and tuck behind the eggs
Open 43 - c/p resize by 30%
Open 63 - c/p resize by 35%
Open 80 - c/p resize by 20%
Open 39 - c/p resize by 30% mirror
Add anymore elements you wish and a dropshadow to each.
When your happy with your tag close off your white background layer and merge visable
Select all Add new layer open paper 27 c/p into selection apply mask/merge groupLower opacity to 70.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!

~Thank You for trying my tutorial, I hope you found it fun and easy to follow~

Sunday, March 16, 2014

CT Tag *Easter Explosion*

CT Tag using the amazing and fun Eater kit 
Easter Explosion
By Tiny Turtle Designs
And can be found at her store

Friday, March 14, 2014

Spring Garden

*Click tag to see  full size*

**This Tutorial was written By Me On March 14, 2014
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am using Everybody ~ HERE
Gem Mask #21 ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Awesome art of Caron Vinson
And can be be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Beautiful PTU Scrapkit Colorful Spring By Amy Marie's Scraps
And can be found  ~ HERE
Thank you Amy Marie for making such amazing kits for us to create with.

*Cluster Set*
And the matching PTU Cluster set by Chillipepper Spiced
And these can also be found in Amy Marie's Store ~ HERE

*NOTES*
Always remember to duplicate your tube and close original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement


Ok this will be a fairly quick tutorial but just as fun I hope
We will be using a ready made cluster and adding some goodies from the matching kit, so let your imagination run wild, thats always fun :)

*Let's Get Started*
Open Cluster 3 duplicate and close original then  image canvas size 725x725 add new layer and send to the bottom floodfill with white and delete the mask layer as we will be adding a different mask.
Open your freehand selection tool select over the frame add new layer open paper 28 c/p into selection/deselect and move below the frame layer.
Open tube c/p resize by 80% arrange above the frame then now duplicate guassian blur 3.00 and change the blend mode to screen and add d/s to original tube layer.
~Time to add the elements I used the following~
Open 178 - c/p and arrange above the white background layer, now duplicate as many times as you want and mirror some, we want there to be a good patch of grass
Open 174 - c/p resize by 70% and arrange between the frame and paper layer and erase any part that shows past the frame then duplicate and arrange to cover the rest and erase any excess
Open 175 - c/p resize by 50% and arrange behind the fence
Open 177 - c/p resize by 50% and arrange above the fence duplicate
Open 179 c/p arrange behind the tree
Open 113 - c/p resize by 40%
Open 147 - c/p resize by 45%
Open 7 - c/p and arrange behind the bucket
Open 3 - c/p resize by 80% and arrange behind the bucket
Open 161 - c/p resize by 75% and arrange behind the bucket
Open 198 - c/p resize by 40%
Open 31 - c/p resize by 30%
Open 64 - c/p resize by 30%
Open 69 - c/p resize by 30%
Open 189 - c/p resize by 45% and arrange behind tube
Add anymore elements you wish and a dropshadow to each.
When your happy with your tag close off your white background layer and merge visable
Select all Add new layer open paper 33 c/p into selection apply mask/merge group resize by 103%.
Merge visable then resize as desired.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!

~Thank You for trying my tutorial, I hope you found it fun and easy to follow~

Thursday, March 13, 2014

Spring Bliss

*Click tag to see  full size*

**This Tutorial was written By Me On March 13, 2014
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am using Aquarelle ~ HERE
Mask #74 by Aqua Rebel ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Awesome art of Jamie Kidd
This tube was purchased at CILM when they were open
And her art can be be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Beautiful PTU Scrapkit Spring Things By Amy Marie's Scraps
And can be found  ~ HERE
Thank you Amy Marie for making such amazing kits for us to create with.

*Cluster Set*
And the matching PTU Cluster set by Chillipepper Spiced
And these can also be found in Amy Marie's Store ~ HERE

*NOTES*
Always remember to duplicate your tube and close original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement


Ok this will be a fairly quick tutorial but just as fun I hope
We will be using a ready made cluster and adding some goodies from the matching kit, so let your imagination run wild, thats always fun :)

*Let's Get Started*
Open Cluster 2 duplicate and close original then  image canvas size 725x725 add new layer and send to the bottom floodfill with white and delete the mask layer as we will be adding a different mask.
Open  your rectangle selection tool and make a selection over the frame open paper 15 c/p resize by 75% arrange invert/delete/deselect and move below your frame.
Open tube I used the closeup c/p arrange above raster 3 resize by 95% duplicate guassian blur 3.00 and change the blend mode to overlay and lower the opacity to 60% add d/s to original tube layer.
~Time to add the elements I used the following~
Open 101 - c/p resize by 65% and arrange above raster 10
Open 125 - c/p arrange below raster 4
Open 136 - c/p arrange above raster 3
Open 163 - c/p resize by 65% and arrange above raster 9
Open 192 - c/p arrange below raster 6
Open 204 - c/p resize by 40% rotate with pick tool duplicate resize by 90% twice and mirror
Open 191 - c/p arrange behind tube layers
Add anymore elements you wish and a dropshadow to each.
When your happy with your tag close off your white background layer and merge visable resize by 108%.
Select all Add new layer open paper 30 c/p into selection apply mask/merge group resize by 103%.
Merge visable then resize as desired.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!

~Thank You for trying my tutorial, I hope you found it fun and easy to follow~

Wednesday, March 12, 2014

Queen Of Hearts

*Click tag to see  full size*

**This Tutorial was written By Me On March 12, 2014
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am using Alice In Wonderland ~ HERE
Mask #208 by WSL ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Awesome art of Pin Up Toons
This tube was a monthly bonus
And can be be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Beautiful PTU Scrapkit Wonderland By Amy Marie's Scraps
And can be found  ~ HERE
Thank you Amy Marie for making such amazing kits for us to create with.

*Cluster Set*
And the matching PTU Cluster set by Chillipepper Spiced
And these can also be found in Amy Marie's Store ~ HERE

*NOTES*
Always remember to duplicate your tube and close original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement


Ok this will be a fairly quick tutorial but just as fun I hope
We will be using a ready made cluster and adding some goodies from the matching kit, so let your imagination run wild, thats always fun :)

*Let's Get Started*
Open Cluster 2 duplicate and close original then  image canvas size 725x725 add new layer and send to the bottom floodfill with white and delete the mask layer as we will be adding a different mask.
Open  your freehand selection tool and make a selection over the frame open paper 14 c/p resize by 75% arrange invert/delete/deselect and move below your frame.
Open tube I used the closeup c/p arrange over the frame and erase any part of the bottom part that shows and duplicate guassian blur 3.00 and change the blend mode to overlay and add d/s to original tube layer.
~Time to add the elements I used the following~
Open 52 - c/p resize by 60% and arrange below raster 18
Open 84 - c/p resize by 55% mirror
Open 19 - c/p arrange below raster 5
Open 40 - c/p resize by 35% and arrange behind raster 11
Open 10 - c/p resize by 30% 
Open 64 - c/p resize by 55% arrange behind tube layers
Add anymore elements you wish and a dropshadow to each.
When your happy with your tag close off your white background layer and merge visable resize by 108%.
Select all Add new layer open paper 18 c/p into selection apply mask/merge group resize by 105%.
Merge visable then resize as desired.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!

~Thank You for trying my tutorial, I hope you found it fun and easy to follow~