Sunday, January 20, 2013

Forever Love

*Click tag to see  full size*

**This Tutorial was written By Me On January 20, 2013
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am using Passions Conflict ROB It is a pay font but any scripty font will work jsut as well.
Template #49 by Tracey Her template can be found on the right hand side
Under Tracy's Bulk Templates ~ HERE 
Mask #362 by WSL~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Awesome art of Pin Up Toons
And His art can now be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Awesome PTU Kit Forever Love By Gimptastic Scraps
And can be purchased ~ HERE 
Thank you Amy for making such wonderful kits to create with :)

*NOTES*
Always remember to duplicate your tube and close original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
Open template duplicate close original delete credits large and small hearts, Resize entire template to width of 650 make sure all layers is checked then Image canvas Size 700x600 and add new layer send it to the bottom and  floodfill the layer with white, we can resize later but I like enought room to work.

Circle : 
Select all/float/defloat new layer open paper 4 c/p into selection deselect add d/s and delete template layer

Rectangle 1 : 
Select all/float/defloat new layer open paper 10 c/p into selection deselect and add d/s and delete template layer.

Dotted Rectangle : 
Select all/float/defloat new layer and floodfill with color #810000 deselect and delete template layer.

Rectangle 2 : 
Select all/float/defloat new layer open paper 6 c/p into selection open mask from the kit c/p arrange invert/delete lower opacity to 50 invert again open closeup tube arrange mirror if you want invert/delete/deselect change the blend mode to overlay lower opacity to 55 then add d/s to rectangle and delete template layer.

Open tube c/p resize if needed duplicate guassian Blur 3.00 and change the blend mode to Overlay and add d/s to original tube layer.

Now time to add the elements
I used the following
Winged Heart Scatter - 70% mirror
Heart Scatter 2 - 90%
Heart Pillow - 50%
Heart 1 - 55% rotate with pick tool
Envelope - 70% rotate with pick tool.
Ball - 60%
Star - 35%
Add anymore elements you wish and a dropshadow to each.
When your happy with your tag close off your white background layer and merge visable resize by 90% all layers NOT checked.
Select all Add new layer open paper 5  c/p into selection apply mask/merge group resize by 103%.
Merge visable then resize as desired.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!


Saturday, January 19, 2013

FB Timeline - Breathe Me


Timeline made using the beautiful PTU kit
Breathe Me 
By Tasha's Playground
You can find the kit HERE



Thursday, January 17, 2013

Gothic Romance

*Click tag to see  full size*

**This Tutorial was written By Me On January 17, 2013
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : Aquarelle ~ HERE
Template #185 By Kristin ~ HERE 
Big Mask #1 By Vix ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Awesome art of Jose Cano
And His art can now be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Awesome PTU Kit Gothic Romance By Toxic Desirez
And can be purchased ~ HERE 
Thank you Kristin for making such wonderful kits to create with :)

*NOTES*
Always remember to duplicate your tube and close original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
Open template duplicate close original delete credits  Resize entire template to width of 700 make sure all layers is checked then Image canvas Size 775x700 and floodfill the background layer with white, we can resize later but I like enough room to work.

Top Rectangle : 
Select all/float/defloat open paper 6 c/p resize by 85% arrange invert/delete/deselect add d/s and delete template layer.
Repeat the same for Bottom Rectangle.

Top Square : 
Select all/float/defloat open paper 4 c/p  arrange invert/delete/deselect add d/s delete template layer.
Repeat the same for Bottom Square.

Black Top Rectangle : 
Select all/float/defloat open paper 16 c/p resize by 85% invert/delete/deselect add d/s and delete template layer.
repeat the same for Black Bottom Rectangle.

Circle : 
Select all/float/defloat open paper 11 c/p invert/delete/deselect add d/s and delete template layer.

Rectangle : 
Select all/float/defloat new layer make a gradient with 2 colors from your kit/tube i used F-#870825, B-#e664ba style Linear Angle/45, Repeats/3, Invert not checked floodfill your layer with your gradient, Apply Blinds, 8,20,Black,Both boxes checked, now open your tube c/p resize by 75% arrange invert/delete/deselect now duplicate your tube mirror and change the blend mode to screen, then crop opaque to remove the excess tube left over.

Open tube again c/p resize by 65% arrange duplicate guassian blur 3.00 change the blend mode to Screen and add d/s to original tube layer.

Now time to add the elements
I used the following
Web - 70% move behind main tube and change the blend mode to overlay.
Skull 1 - 25% rotate with pick tool
Letter - 35% rotate with pick tool
Dripped Heart - 30%
Skullerfly - 30% rotate with pick tool
Winged Heart - 35%
Wordart - move above your white background layer
Sparkles - move above the spiderweb
Add anymore elements you wish and a dropshadow to each.
When your happy with your tag close off your white background layer and merge visable resize by 90% all layers NOT checked.
 Select all Add new layer open paper 10  c/p into selection apply mask/merge group.
Merge visable then resize as desired.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!


Tuesday, January 15, 2013

Be Mine Valentine

*Click tag to see  full size*

**This Tutorial was written By Me On January 15, 2013
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am using Passions Conflict ROB It is a pay font but any scripty font will work just as well.
Template #358 by Missy ~ HERE 
Big Mask #1 By Vix ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)
Tramages - Pool Shadow
Xero-Fritillary

*Tube/s of Choice* 
I am using the Awesome art of Keith Garvey
And His art can now be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Awesome PTU Kit Be Mine By Designs By Sarah
And can be purchased ~ HERE 
Thank you Sarah for making such wonderful kits to create with :)

*NOTES*
Always remember to duplicate your tube and close original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
Open template duplicate close original delete credits and wordart and heart 1, Resizt entire template to width of 650 make sure all layers is checked then Image canvas Size 700x600 and floodfill the background layer with white, we can resize later but I like enought room to work.

Glitter Circle :
Select all/float/defloat new layer floodfill with color #ce3c60 add noise Uniform/70/monochrome checked deselect and add d/s and delete template layer.

Circle 1 : 
Select all/float/defloat open paper 7 c/p resize by 85% invert/delete/deselect and delete template layer.

Rectangle 1 : 
Select all/float/defloat new layer floodfill with black Texture Effects Weave 2, 6, 10, Both colors-white, fill gaps checked, deselect add d/s and delete template layer.

Rectangle 2 : 
Select all/float/defloat new layer make a gradient from 2 colors in your kit/tube I used F-#f496b0, B-#ce3c60 Angle-45, Repeats-5, Invert Checked,then apply Tramages Pool shadow, First 6 settings all 50, Intensity-0, Lighting-140 apply again, then Zero-Fritillary with the following settings
deselect and delete template layer.

Glitter Circle Left :
Add Noise Uniform/70/Monochrome checked add d/s.

Circle left :
Select all/float/defloat open paper 3 c/p resize by 80% invert/delete/deselect and delete template layer.

Glitter Circle right : 
Add Noise Uniform/70/Monochrome checked add d/s.

Circle Right : 
Select all/flaot/defloat open paper 4 c/p resize by 70% invert/delete/deselect and delete template layer.

Glitter Circle Center : 
Select all/float/defloat new layer floodfill with same gradient Apply Tramages Pool Shadow with the same settings you used before then Add Noise Uniform/70/Monochrome checked add d/s deselect  add d/s and delete template layer.

Heart 2 & 3 : 
Select all/float/defloat new layer floodfill with same gradient Apply Tramages Pool Shadow with the same settings and apply Xero-Fritillary with the same settings deselect and add d/s and delete template layer.


Circle Center :
Select all/float/defloat open paper 5 c/p resize by 70% invert/delete/invert again add new layer floodfill with same gradient deselect and change the blend mode to overlay and delete template layer.

Open tube c/p arrange duplicate guassian blur 3.00 and change the blend mode to overlay add d/s to original tube layer.

Now time to add the elements
I used the following
Envelope - 30% rotate with pick tool
Chocolate 4 - 35%
Hanging Heart - 45%
Bow  - 40%
Wordart 1 - 70% add a fat white gradient glow
Heart 3 - 40% rotate with pick tool
Chocolate 1 - 35%
Chocolate 5 - 35%
Ribbon 1 - 55%
Add anymore elements you wish and a dropshadow to each.
When your happy with your tag close off your white background layer and merge visable resize by 90% all layers NOT checked.
Add new layer floodfill with color #ce3c60 apply Tramages Pool Shadow play around with the settings for this apply mask/merge group.
Merge visable then resize as desired.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!


Yo DJ

*Click tag to see  full size*

**This Tutorial was written By Me On January 14, 2013
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am using Inspration It is a PTU font and I can not share it.
Template #345 by Missy ~ HERE 
Big Mask #1 By Vix ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)
Xero-Fritillary

*Tube/s of Choice* 
I am using the Awesome art of Elias Chatzoudis
This tube was purchased at PTE when they were open
And His art can now be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Awesome PTU Kit Rawkin Music by Toxic Desirez
And can be purchased ~ HERE 
Thank you Kristin for making such wonderful kits to create with :)

*NOTES*
Always remember to duplicate your tube and close original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
Open template duplicate close original delete credits Image canvas Size 850x625 and floodfill the background layer with white, we can resize later but I like enought room to work.

Glittered Rectangle : 
Add noise Guassian/75/Monochrome Checked add d/s.

Gradient rectangle : 
Seelct all/float/defloat new layer make a gradient with 2 colors from your either your kit or tube , I am using Foreground-#a72a6a , Background-#fdda65 , Style-Linear, Angle-45, repeats-3, and floodfill your layer with the gradient then add Xero-Fritillary with the following settings, 
deselect and delete template layer.

Square : 
Select all/float/defloat open paper 16 c/p resize by 80% arrange invert/delete/deselect and delete template layer.

Dotted line 1 & 2 : leave as is.

Circle left : 
Select all/float/deflaot new layer floodfill with black then texture effects-weave 5,10,20,both clors white, fill gaps checked, deselect and delete template layer Repeat the same for Circle right.
Glittered Circle 1 : 
Add the same noise and d/s.

Large Circle 1 : 
Select all/float/defloat new layer and floodfill with color #a72a6a deselect and delete template layer.
Glittered Circle 2 ; add dame noise no d/s.

Large Circle 2 :
 Select all/float/defloat new layer and floodfill with color #fdda65 deselect and delete template layer.

Circle : 
Select all/float/defloat open paper 11 c/p resize by 80% invert/delete/deselect and delete template layer.
Glittered rectangle Center : Add same noise and d/s.

Rectangle Center  : 
Select all/float/defloat new layer and floodfill with color #a72a6a add same weave as you used before but change both colors to  #fdda65 deselect and delete template layer.

Yo DJ : 
Select all/float/defloat new layer and floodfill with white deselect add medium black gradient glow and d/s. delete template layer.

Gradient rectangle : 
Select all/float/defloat add new layer floodfill with the same gradient except change the angle to 135, Open tube c/p arrange just the head on the left side invert/delete invert again take Rawkin Musix wordart c/p resize by 80% arrange invert/delete/deselect and make sure it is above your tube layers change the blend mode to screen, duplicate tube move over to the right slightly merge down apply blinds, 5, 20,both boxes checked and color black now duplicate again on the top layer guassian blur 3.00 and change the blend mode to overlay and lower the opacity to 75 then on the original tube layer change the blend mode to screen, and delete template layer.

Pixel Wording :
 Select all/float/defloat new layer floodfill with black add a fat white gradient glow and d/s deselect and delete template layer.

Thin rectangle : leave as is.

Gurlz Wordart : 
Select all/float/defloat new layer and floodfill with the same gradient but change the angle back to 45 deselect and delete template layer.

Frame :
 Apply the same noise as before but change the amount to 60 and apply it twice add d/s.

Open tube c/p arrange now select the thin blank rectangle and erase the  part of the tube that covers deselect duplicate tube guassian blur 3.00 and change the blend mode to overlay and add d/s to original tube layer.

Now time to add the elements
I used the following
Skull 2 - 30%
Doodle - 65%
Bow 2 - 55% then 85% mirror and rotate with pick tool.
Flower 1 - 35%
Flower 2 - 45%
Note 1 - 30%
Mix tape - 35% rotate with pick tool.
Ipod Mini - 25%
Sparkles - move behind tubes
Add anymore elements you wish and a dropshadow to each.
When your happy with your tag close off your white background layer and merge visable resize by 95% all layers NOT checked.
Add new layer  select all open paper 6 c/p into selection apply mask/merge group.
Merge visable then resize as desired.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!


Thursday, January 10, 2013

Skull -n - Bones

*Click tag to see  full size*

**This Tutorial was written By Me On January 10, 2013
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am Brush Tip-c ~ HERE 
Template #121 By Horseplays Pasture ~ HERE 
Mask #208 by WSL ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Awesome art of Pin Up Toons
And His art can be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Awesome PTU kit Skull N Bones Mini By TammyKat Designs
And can be purchased ~ HERE 
Thank you Tammy for making such wonderful kits to create with :)

*NOTES*
Always remember to duplicate your tube and close original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
Open template duplicate close original delete credits Image canvas Size 625x625 and floodfill the background layer with white, we can resize later but I like enought room to work.
Circle 1 : Select all/float/defloat new layer and floodfill with white add noise Uniform/85/Monochrome Checked deselect and delete template layer add d/s.
Circle 2 : Select all/float/defloat open paper 8 c/p resize by 70% invert/delete/deselect and delete template layer.
Diamond circle ring : Select all/float/deflaot new layer open paper 3 c/p into selection deselect and delete template layer.
Rectangle : Select all/float/defloat new layer floodfill with white and add same noise except chage amount to 65, deselect and delete template layer add d/s.
Square 1 : Select all/float/defloat new layer open paper 2 c/p into selection now take your tube c/p resize if needed and arrange invert/delete/deselect change the blend mode to Lumiance(L) and add blinds 4/20/Both Boxes checked and color #808080  and delete template layer, Now do the same steps for the other 3 squares, just copy different parts of your tube.
Corner Lines : Select all/float/defloat new layer open paper 3 c/p into selection add same noise you used for the rectangle deselect and delete template layer add d/s.
Open tube c/p resize if needed I did mine by 95% arrange duplicate Guassian Blur 3.00 and change the blend mode to Overlay and add d/s to original tube layer.
Now time to add the elements
I used the following
Element 20 - arrange/duplicate/mirror
Element 15a - 65%
Element 10 - 75% rotate with pick tool
Element 19 - arrange duplicate/mirror/flip
Element 9 - 80% move below glitter circle layer arrange duplicate and arrange.
Element 1a - 80%
Element 21 - 50% rotate with pick tool.
Add anymore elements you wish and a dropshadow to each.
When your happy with your tag close off your white background layer and merge visable
Add new layer  select all open paper 4 c/p into selection apply mask/merge group.
Merge visable then crop your tag.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!


Thursday, January 3, 2013

Passion

*Click tag to see  full size*

**This Tutorial was written By Me On January 3, 2013
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am One Starry Night~ HERE 
Template #177 By Kristin ~ HERE 
Big Mask #1 By Vix ~ HERE
Dropshadow of choice
Inner Bevel of Choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Awesome art of Ismael Rac
And His art can be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Awesome PTU kit Passion By Pimped Designs
And can be purchased ~ HERE 
Thank you Cora for making such wonderful kits to create with :)

*NOTES*
Always remember to duplicate your tube and close original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
Open template duplicate close original delete credits Image canvas Size 850x700 and floodfill the background layer with white, we can resize later but I like enought room to work.
Top Black Square : Select all/float/defloat open paper 7 c/p invert/delete/deselect Add slight inner bevel of choice and delete template layer .
Repeat the same steps for bottom Black Square.
Top Red Circle : Select all/float/defloat new layer open paper 9 c/p into selection/deselect Add slight inner bevel of choice and delete template layer.
Repeat the same steps for Bottom Red Circle.
Top Red rectangle : Select all/float/defloat open paper 5 c/p resize by 85% invert/delete/deselect Add slight inner bevel of choice and delete template layer.
Repeat the same steps for bottom red Rectangle.
Round rectangle : Select all/float/defloat new layer open paper 4 c/p into selection now open closeup tube c/p resize by 75% move to the far left of the rounded rectangle arrange/invert/delete and deselect , now duplicate your tube layer and mirror and merge both together duplicate Guassian blur 3.00 change the blend mode to Overlay, now on your original tube layer change the blend mode to Lumiance(L) and add blinds 5,20,Horizontal and Light from Top both checked and color black then delete template layer.
Circle : Select all/float/defloat new layer open paper 5 c/p into selection deselect Add slight inner bevel of choice and delete template layer.
Open main tube c/p resize by 90% if your using the same tube arrange duplicate Guassian blur 3.00 and change the blend mode to overlay add d/s to original tube layer.
Now time to add the elements
I used the following
Arrow - 45% arrange duplicate/mirror/flip
Lace 2 - arrange erase any excess and duplicate/mirror/flip
Ribbon Roses - 60% and move to the bottom of the tube
Lips - 40%
Flair 3 - 75% rotate with pick tool
Flower 1 - 35%
Flower 2 - 30%
Flower 3 - 25%
Key - 35% rotate with pick tool
Add anymore elements you wish and a dropshadow to each.
When your happy with your tag close off your white background layer and merge visable
Add new layer  select all open paper 4 c/p into selection apply mask/merge group.
Merge visable then crop your tag.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!


Tuesday, January 1, 2013

Meowzerz

*Click tag to see  full size*

**This Tutorial was written By Me On January 1, 2013
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am Doris Day ~ HERE 
Template #35 By Twizted ~ HERE 
Mask #81 By WSL ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Awesome art of Elias Chatzoudis
This tube was purchased at PTE when they were open
And His art can be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Awesome PTU kit Meowzerz By Toxic Desirez
And can be purchased ~ HERE 
Thank you Kristin for making such wonderful kits to create with :)

*NOTES*
Always remember to duplicate your tube and close original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
NOTE we will be working from the bottom to the top
Open template duplicate close original delete credits and layers 13, 14, 15 and copy of 15, Image canvas Size 825x525 add new raster layer send to the bottom and floodfill with white, we can resize later but I like enought room to work.
Raster 9 : Select all/float/defloat open paper 6 c/p resize by 75% move over the left oval arrange invert/delete, Invert again c/p paper again arrange over right oval invert/delete/deselect and delete template layer and merge both paper layers together.
Raster 8 : Select all/float/defloat open paper 3 c/p resize by 70% invert/delete/deselect and delete template layer.
Raster 10 : Add noise 75/Uniform/Monochrome Checked 
Raster 2 : Select all/float/defloat open paper 11 c/p resize by 60% invert/delete/deselect and delete template layer.
Raster 7 : Select all float/defloat open paper 9 c/p resize by 90% invert/delete/deselect and delete template layer.
Raster 11 : Apply the same noise you used for raster 10.
Raster 5 : Select all/float/defloat open paper 1 c/p resize by 60% invert/delete/deselect and delete template layer, Now do the same for "Copy of raster 5" layer.
Raster 3 : Select all/float/defloat open paper 12 c/p resize by 60% invert/delete/deselect and delete template layer.
Raster 12 : Apply the same noise you have used on raster layers 10 and 11.
Open tube c/p  duplicate Guassian Blur 3.00 and change the blend mode to Overlay add d/s to original tube layer
Now time to add the elements
I used the following
Star Border - 80% twice move above oval's layer arrange duplicate/mirror.
Label - 40%
Bowl - 25%
Milk Bottle - 30%
Fish Bone - 20% arrange duplicate/mirror
Yarn - 30%
Skull 1 - 25% rotate with pick tool
Star - 30% rotate with pick tool arrange and duplicate 2 or 3 times and arrange 
Sparkles - move below the tube layers.
Add anymore elements you wish and a dropshadow to each.
When your happy with your tag close off your white background layer and merge visable
Add new layer  select all and floodfill with color #86e2d3   apply mask/merge group resize by 105% twice.
Merge visable then crop your tag.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!