Thursday, August 30, 2012

Biker Babe

*Click tag to see  full size*

**This Tutorial was written By Me On August 30, 2012
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am Using Dominique ~ HERE
Mask #Big Mask 1 by Vix ~ HERE
Template #177 By Kristin  ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Beautiful art of Keith Garvey
And can be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Awesome PTU kit Biker Bitch by Inzspired Creations
And can be found ~ HERE 
Thank you Nicky for making such wonderful kits to create with :)

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
Open Template duplicate close original, delete credits Image canvas Size 800x750 and floodfill your background layer with white, we can resize later but we need room to work.
Top & Bottom Black Square : Merge together select all/float/defloat new layer open paper 12 c/p into selection deselect add fat white gradient glow and delete template layer.
Top & Bottom red circle : Repeat same steps as you did before but use paper 1.
Top & Bottom red Rectangle : Repeat same steps as you did before but use paper 6.
Round Rectangle : Select all/float/defloat new layer open paper 2 c/p into selection/deselect and delete template layer.
Circle : Select all/float/defloat new layer open paper 6 c/p into selection Open close up tube c/p resize by 85% invert/delete/deselect duplicate Guassian Blur 3.00 change the blend mode to Soft Light and on original tube layer add d/s and delete template layer.
Open Frame 3 c/p resize by 70% move above your circle layer duplicate and move to the top take your eraser tool and erase just the part of the frame that covers the tube and add d/s to bottom frame.
Now Time To Add The Elements
I Used The Following
Motorcycle 1 : 70%
Charm 2 : 75%
Bow 1 : 45
Sign : 45%
Cocktail 2 : 50%
Whip : 50%
Sparkles 1 
Add anymore elements you wish and a dropshadow to each
When your happy with your tag close off your white background layer and merge visable resize to a width of 625
Open paper 15 c/p apply mask/merge group resize by 95%
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!


Wednesday, August 29, 2012

Catwoman

*Click tag to see  full size*

**This Tutorial was written By Me On August 29, 2012
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am Using Cat Krap! ~ HERE
Mask #84 by WSL ~ HERE
Template #142 By Horseplays Pasture  ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)
Tramages - Pool Shadow
VM Extravaganza - Transmission
Xenofex - Constellation

*Tube/s of Choice* 
I am using the Beautiful art of Ismael Rac
And can be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Awesome PTU kit I Heart Batman By Pimped Designs
And can be purchased ~ HERE 
Thank you Cora for making such wonderful kits to create with :)

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
Open Template duplicate close original, delete credits and stars, Image canvas size 650x650 and floodfill your background with white.
Rectangle 1 : Select all/float/defloat new layer open paper 6 c/p into selection deselect and delete template layer.
Rectangle 1 Dotted Corner : Select all/float/defloat new layer and floodfill with white deselect and delete template layer.
Rectangle 2 : Repeat same steps as you did for Rectangle 1 except use paper 1.
Rec 2 dotted Corner : Repeat the same steps as you did with the previous dotted corner.
Glitter Oval : Leave as is
Oval : Select all/float/defloat new layer open paper 6 c/p into selection deselect spply Tramages Pool Shadow 50,50,50,50,50,50,128,75 then blinds 6, 20, Horizontal unchecked, light from top checked, color black, delete template layer.
Strip : Apply VM Extravaganza Transmission 6, 0, 25 and change the opacity to 55.
Open tube c/p resize by 80% arrange duplicate guassian blur 3.00 change the blend mode to Soft light and d/s to original tube layer.
Now Time To Add The Elements
I Used The Following
Staple : duplicate
Light : 80%
Paw Prints : 40% duplicate 90%
Flower 1 : 60% duplicate 85% arrange
Jewel 2 : 65%
Heart 1 : 65% rotate
Cityscape : 90% arrange and erase any on the sides apply a medium white gradient glow
Cat : 40% mirror
Add anymore elements you wish and a dropshadow to each
When your happy with your tag close off your white background layer and merge visable resize to a width of 625
Open paper 6 c/p apply mask/merge group resize by 108% apply Xenofex2-Constellation I used Small Stars Setting , I never give settings because there is so much variety just play around until you find what looks best to you.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!


Tuesday, August 28, 2012

Tabitha

*Click tag to see  full size*

**This Tutorial was written By Me On August 28, 2012
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am Using LD Twylight it is a pay font 
but this is a very simalar one called Vampire ~ HERE
Mask #219 by WSL ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Beautiful art of Anna-Marine
And can be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Awesome PTU kit Tabitha By Pimped Designs
And can be purchased  ~ HERE
Thank you Cora for making such wonderful kits to create with :)

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
Open new image 650x650 floodfill with white, Open frame 13 c/p resize by 80% free rotate left/90/all layers unchecked, click inside with your magic wand expand by 3 new layer open paper 10 c/p into selection do not deselect , open tube c/p resize by 95% invert/delete/deselect duplicate tube Guassian blur 3.00 change the blend mode to Overlay then opacity to 60 add d/s to original tube layer and frame.
Open frame 10 c/p resize by 80% with your pick tool and rotate see my tag for placement duplicate/mirror and merge down click inside each frame with your magic wand expand by 3 add new layer open paper 9 c/p into selection deselect add d/s to frame layer and move paper below and merge together.
Now Time To Add The Elements
I Used The Following
Staple : duplicate/arrange
Chain Swirl : 45% rotate
Flower 2 : 50% duplicate then 80%
Greens 2 : 40% duplicate/mirror/flip and erase any part of the stems that show.
Cat : 45%
Sparkle Light : 45%
Bow 1 : 45%
Star String : 35%
Butterfly : 40% rotate
Star 3 : 45%
Add anymore elements you wish and a dropshadow to each
When your happy with your tag close off your white background layer and merge visable resize to a width of 625
Add new layer select all open paper 12 c/p into selection/deselect and  apply mask/merge group select all again add new layer open paper 8 c/p into selection deselect and apply mask/merge group now on your top mask change the blend mode to screen.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!


Longing

*Click tag to see  full size*

**This Tutorial was written By Me On August 28, 2012
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am Using Tsarine Anastasia Script ~ HERE
Mask #Big Mask 1 by Vix ~ HERE
Template #131 by Leah  ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow 
VM-Extravaganza Transmission
VM-Toolbox Sparkle

*Tube/s of Choice* 
I am using the Beautiful art of Jennifer Janesko
And can be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Awesome FTU kit Longing By Gimptastic Scraps ~ HEREhttp://amyleahsgimptastictuts.blogspot.com/2012/07/2-former-ptu-kits-now-ftu-longing.html
Thank you Amy for making such wonderful kits to create with :)

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
Open Template duplicate close original, delete credits and layers words 1+2, Image canvas size 700x550 and floodfill your background with white.
Rectangle 1+2 : Merge together, select all/float/defloat new layer floodfill with black, apply VM-Extravaganza Transmission with the following settings
Line Width - 3
Offset - 0
Contrast - 40
deselect and delete template layer.
Square 3+4 : Merge together, select all/float/defloat new layer open paper 6 c/p into selection deselect and delete template layer.
Circle 2+3 : Merge together, select all/float/defloat new layer open paper 3 c/p into selection apply Blinds with the following settings
Width - 6
Opacity - 20
Horizontal - Not Checked
Light From Top - Checked
Color - #808080
deselect and delete template layer.
Square 1+2 : Merge together, select all/float/defloat  new layer floodfill with black and apply VM-Toolbox Sparkle with the following settings
deselect and delete template layer add a fat white gradient glow.

Circle : Select all/float/defloat new layer open paper 5 c/p into selection , Open tube c/p resize by 85% arrange invert/delete deselect.duplicate tube guassian blur 3.00 change the blend mode to overlay and on the original tube layer change the blend mode to Lumiance(L) and add d/s
Select your circle background layer again expand by 6 new layer floodfill with white add noise Random/100/monochrome checked, contract by 8 delete and deselect and move above your tube layer 
Now Time To Add The Elements
I Used The Following
Bling 3 : 40%
Flower 1 : 65% duplicate 85%
Flower 3 : 65%
Leaves : 
Heart Charm : 60%
Lace 2 : arrange duplicate/flip
Add anymore elements you wish and a dropshadow to each
When your happy with your tag close off your white background layer and merge visable resize to a width of 625
Open new layer floodfill with black apply mask/merge group.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!


Monday, August 27, 2012

Team Jacob

*Click tag to see  full size*

**This Tutorial was written By Me On August 27, 2012
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am Using Almagro ~ HERE
Mask #362 by WSL ~ HERE
Template #133 By Horseplays Pasture  ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Beautiful art of April Howlett
And can be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Awesome PTU kit Team Jacob By Designs By Sarah
And can be purchased ~ HERE 
Thank you Sarah for making such wonderful kits to create with :)

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
Open Template duplicate close original, delete credits .
Rectangle 1 : Select all/float/defloat new layer floodfill with black deselect and delete template layer.
Rectangle 2 : Select all float/defloat new layer open paper 3 c/p into selection delete/deselect and delete template layer.
Rectangle 3 & 4 : merge together select all/float/defloat new layer open paper 2 c/p into selection deselect and delete template layer.
Circle Back : Select all/float/defloat new layer floodfill with black deselect and delete template layer.
Circle : Select all/float/defloat open paper 1 c/p resize by 80% invert/delete/invert again, Open tube c/p resize by 90% arrange invert and erase just the bottom of the tube deselect duplicate tube Guassian Blur 3.00 and change the blend mode to Screena nd lower opacity to 30, add d/s to original tube layer, delete template layer.
Now Time To Add The Elements
I Used The Following
Screw 1 : 40% arrange and duplicate
Pawprints : 35%
Gear 2 : 30%
Gear 1 : 30%
Felt : 25%
Button 3 : 50%
Ribbon 2 : 70% mirror
Charm 1 : 45%
Full Moon : 35% no d/s
Charm 3 : 45%
Dreamcatcher : 35%
Add anymore elements you wish and a dropshadow to each
When your happy with your tag close off your white background layer and merge visable resize.
Open paper 3 c/p apply mask/merge group.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!


Sunday, August 26, 2012

The Raven

*Click tag to see  full size*

**This Tutorial was written By Me On August 26, 2012
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am Using Penakut ~ HERE
Mask #113 By WSL ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)
Xero - Grayscaler

*Tube/s of Choice* 
I am using the Beautiful art of Screaming Demons
And can be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Awesome PTU kit The Raven By Pimped Designs
And can be purchased ~ HERE 
Thank you Cora  for making such wonderful kits to create with :)

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
Open new image 700x650 floodfill with white.
Open frame 1 c/p resize by 85% click inside with your magic wand expand by 2 add new layer open paper 1 c/p into selection deselect and move below the frame apply Tramages Pool Shadow default settings then apply again but change Intensity to 60 , add d/s to frame layer.
Open frame 5 c/p resize by 75% take your selection tool and select the entire frame make add new layer open paper 8 c/p into selection move below your frame, keep selected and take your closeup tube and arrange parts inside each square, invert/delete then invert again you may have to erase any part of the tube that overlaps. when your happy merge all tube layers together change the blend mode to Lumiance(L) duplicate guassian blur 3.00 and change the blend mode to screen add d/s to frame, close off circle frame paper and background layers and merge visable, unhide other the other layers take your pick tool and rotate square frame and arrange.
Open main tube c/p resize if needed select the inside of your circle frame again expand by 6 invert and erase just the bottom of the tube, deselect apply xero-Grayscaler default settings add d/s to tube.
Now Time To Add The Elements
I Used The Following
Staple : 90% duplicate and rotate with pick tool merge down duplicate/mirror and arrange.
Flower 2 : 60%
Ribbon 2 : 70%
Flower 1 : 45%
Flower 4 : 50%
Key : 55%
Clock : 40%
Raven 1 : 40% and add a thin white gradient glow
Tree 2 : 65%
Books 3 : 45%
Add anymore elements you wish and a dropshadow to each
When your happy with your tag close off your white background layer and merge visable resize to width of 625.
Open paper 5 c/p apply mask/merge group apply blinds Width-5,Opacity-20,Color-#c0c0c0, Horizontal & Light from top checked.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!


Happy Halloween 2012

*Click tag to see  full size*

**This Tutorial was written By Me On August 26, 2012
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am Using Burton's Nightmare ~ HERE
Mask #84 By WSL ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)
Xenofex - Constellation

*Tube/s of Choice* 
I am using the Beautiful art of Pin Up Toons
And can be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Awesome PTU kit Hallows Night By Pimped Designs
And can be purchased ~ HERE 
Thank you Cora  for making such wonderful kits to create with :)

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
Open new image 650x650 floodfill with white.
Open Frame 4 c/p resize by 85% rotate with your pick tool sharpen add d/s.
Open frame 3 c/p resize by 83% click inside with your magic wand expand by 2 add new layer open paper 7 c/p into selection move below your frame,deselect then Open tube c/p resize by 82% arrange duplicate Guassian Blur 3.00 and change the blend mode to Soft Light and add d/s to original tube layer.
Now Time To Add The Elements
I Used The Following
Tree 1 : 70%
Flower 4 : 60% duplicate
Flower 1 & 2 : 50%
Ghost : 40%
Wordart : 45% duplicate and erase on each so you have seperate words, arrange merge together 
Add anymore elements you wish and a dropshadow to each
When your happy with your tag close off your white background layer and merge visable resize.
Open paper 5 c/p apply mask/merge group resize by 102% apply Xenofex2-Consetllation I Used Small stars setting.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!


Friday, August 24, 2012

Bee Happy

*Click tag to see  full size*

**This Tutorial was written By Me On August 24, 2012
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
Font of choice : I am Using AmoreATT ~ HERE
Mask #154 by WSL ~ HERE
Template #150 By Horseplays Pasture  ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Beautiful art of Suzanne Woolcott
And can be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Awesome FTU kit Dont Worry Bee happy By Gimtastic Scraps ~ HERE 
Thank you Amy for making such wonderful kits to create with :)

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
Open Template duplicate close original, delete credits Image Canvas Size 650x600 floodfill background with white.
Square 1 : Select all/float/defloat new layer open paper 8 c/p into selection deselect  add a slight bevel and delete template layer.
Square 2 : Repeat same steps as you did for square 1.
Rectangle : Select all/float/defloat open paper 5 c/p invert/delete/deselect add the same slight bevel then delete template layer.
Lines : Select all/float/defloat new layer floodfill with black deselect/delete template layer.
Glitter Circle : Select all/float/defloat new layer floodfill with color #f9b61f add noise Uniform/35/Monochrome checked, deselect and delete template layer.
Circle : Select all/float/defloat new layer open paper 2 c/p into selection , open tube c/p resize by 85% invert and erase the bottom part of the tube, deselect duplicate Guassian Blur 3.00 change the blend mode to overlay and add d/s to original tube layer, delete template layerNote I also added the bee that came with the tube.
Now Time To Add The Elements
I Used The Following
Honeypot : 85%
Mushrooms : 50%
Wordart : 90% dulplicate then erase Dont Worry from 1 copy and Bee Happy from the other c/p arrange and add a medium white gradient glow
Bee 1 : 70%
Add anymore elements you wish and a dropshadow to each
When your happy with your tag close off your white background layer and merge visable resize to a width of 625
Open paper 5 c/p apply mask/merge group resize by 95% duplicate/mirror/flip
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!


Serene Fairy

*Click tag to see  full size*

**This Tutorial was written By Me On August 24, 2012
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
Font of choice : I am Using Alex Brush ~ HERE
Mask #Big Mask 1 by Vix ~ HERE
Template #268 By Divine Intentionz  ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Beautiful art of AlessiaC
And can be purchased  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Awesome PTU kit it's Magic By Rebel Designs
And can be purchased ~ HERE 
Thank you Rene for making such wonderful kits to create with :)

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
Open Template duplicate close original, delete credits and all layers leaving only Circle,Oval Half 1 & 2, Glitter 7 Square shapes , then resize width to 650, height will adkist itself make sure all layers are checked then Image Canvas Size 700x575 and floodfill background with white.
Square Shape : Select all/float/defloat new layer open paper 2 c/p into selection deselect and Add a  bevel of choice  delete template layer and add d/s.
Glittered Square : Select all/float/defloat new layer open paper 6 c/p into selection deselect and add same bevel  delete template layer and d/s.
Merge both oval layers together select all/float/defloat new layer make a gradient using 2 colors from your kit and or tube , i chose a blue and pink but the colors are entirely up to you depending on what looks best to you, add new layer and floodfill with your gradient add noise Guassian/12/Monochrome Checked, deselect and delete template layer add d/s.
Circle : Select all/float/defloat new layer open paper 7 c/p into selection, Open tube c/p and somewhere on PSP paste as a new image mirror c/p resize by 105% arrange invert/delete/deselect, change the blend mode to Overlay and add d/s to tube delete template layer and add  same bevel and d/s to circle.
Open tube c/p resize if needed duplicate Guassian Blur 2.00 and change the blend mode to Overlay and add d/s to original tube layer.
Now Time To Add The Elements
I Used The Following
Element 34 : 25%
Element 35 : 20% duplicate then again by 85%
Element 13 : 50% duplicate/mirror
Element 43 : 45%
Element 47 : 55%
Element 2 : 40% and rotate with pick tool
Element 30 : 20% duplicate 2 times and arrange under the flowers
Add anymore elements you wish and a dropshadow to each
When your happy with your tag close off your white background layer and merge visable resize to a width of 650
Open paper 2 c/p apply mask/merge group resize by 95%
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!


Thursday, August 23, 2012

Early Fall

*Click tag to see  full size*

**This Tutorial was written By Me On August 23, 2012
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am Using Aquarelle ~ HERE
Mask #22 By Gems ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow 

*Tube/s of Choice* 
I am using the Awesome Art of Zindy S.D. Nielsen
And can be purchased at her store  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Awesome PTU kit Early Fall By Inzpired Creations
And can be purchased ~ HERE 
Thank you Nicky for making such wonderful kits to create with :)

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
Open new image 700x600 floodfill with white.
Open frame 2 c/p resize by 85% click insode with your magic wand expand by 2 Open paper 2 c/p resize by 80% arrange invert/delete,move below the frame invert again and contract by 1 open tube c/p resize by 90% invert and erase just the bottom of the tube deselect and add d/s to frame and tube layer.
Now Time To Add The Elements
I Used The Following
Tree 1 : 80%
Tree 2 : 50% and move it over the top of tree 1
Grassy Hill : 30% duplicate
Mushrooms : 45%
Critter 2 : 40%
Flower 3 : 35%
Flower 1 : 30% duplicate
Flower 2 : 25%
Butterfly 1 : 25%
Fruit 1 : 30%
Add anymore elements you wish and a dropshadow to each
When your happy with your tag close off your white background layer and merge visable resize to a width of 650
Open paper 7  c/p apply mask/merge group resize by 85%
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!


Blood Thirsty

*Click tag to see  full size*

**This Tutorial was written By Me On August 23, 2012
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : I am Using Espectro Swash it is a Pay Font 
But here is a free one that will work just as well ~ HERE
Mask #Big Mask 1 by Vix ~ HERE
Template #183 By Kristin  ~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow 
VM Extravaganza - Transmission
Tramages - Pool Shadow

*Tube/s of Choice* 
I am using the Awesome Art of Elias Chatzoudis
This tube was purchased at PTE when they were open
His work  can be purchased at his store  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Awesome PTU kit Blood Thirsty By Inzpired Creations
And can be purchased ~ HERE 
Thank you Nicky for making such wonderful kits to create with :)

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
Open Template duplicate close original, delete credits floodfill your background layer with white, Image canvas Size 850x750 we can resize later I just like enough room to work.
Black Top & Black Bottom rectangles : Merge together, select all/float/defloat new layer open paper 14 c/p into selection/deselect and delete template layer add d/s.
White top & Bottom rectangles : repeat the same steps as you did for the previous rectangles except use paper 7.
Grey top & Bottom Rectangles : Repeat the same steps as you did for the previous rectangles except use paper 11.
Grey Top & Bottom Square : Select all/float/defloat new layer floodfill with black apply VM Extravganza - Transmission 
Line Width - 4
Offset - 0
Contrast - 40
Deselect and delete template layer, add d/s.
Dark Grey Top & Bottom rectangle : Select all/float/defloat , make a gradient Foreground #790700 and background black Linear. Angle-45, Repeats-3, Invert checked, add a new layer and floodfill with your gradient, then apply Tramages - Pool Shadow default setting or play around untill you find what looks best to you, then apply Blinds with the following settings
Width - 6
Opacity - 20
Horizontal - Unchecked
Light From Top - checked
Color Black
Deselect and delete template layer, add a fat black gradient glow then  add d/s.
Circle : Select all/flaot/defloat new layer open paper 12 c/p into selection deselect and add d/s.
Open tube c/p arrange duplicate Guassian Blur 3.00 and change the blend mode to soft light, add d/s to original tube layer.
Now Time To Add The Elements
I Used The Following
Web 2 : Move behind the circle layer.
Fog : move behind the web layer arrange duplicate/mirror.
Moon 1 : 65% 
Lightning : arrange
Bow : 65%
Cocktail 2 : 60%
Raven : 50%
Candles 1 : 45%
Lips 1 : 40% pick tool and rotate slightly.
Add anymore elements you wish and a dropshadow to each
When your happy with your tag close off your white background layer and merge visable resize to a width of 650
Open paper 15 Apply Tramages - Pool Shadow default settings c/p apply mask/merge group resize by 95%
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!


Wednesday, August 22, 2012

Autumn Morning

*Click tag to see  full size*

**This Tutorial was written By Me On August 22, 2012
*This tutorial is my creation only*
Any resemblance to other tutorials is not intended 
Use my tutorial as a guide to make your tag your own 

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice : Tsarine Anastasia Script ~ HERE
Mask #84 by WSL ~ HERE
Image of choice : I am using one from Stock.Exchng  ( be sure to credit on your finished tag)~ HERE
Dropshadow of choice

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Beautiful art of Zindy S.D. Nielsen
And can be purchased at her store  ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the Awesome PTU kit That Fall Feeling By Designs By Sarah
And can be purchased ~ HERE 
Thank you Sarah for making such wonderful kits to create with :)

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer Unless otherwise stated
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize
Elements are added with a D/S unless otherwise stated 
And see my finished tag for placement

*Let's Get Started*
Open a new image 650x650 and floodfill with white, Open frame 4 c/p resize by 85% click inside both openings of the frame expand by 5 open image c/p resize by 20% if using the same one arrange invert/delete/deselect and add d/s to frame.
Open tube c/p resize and arrange over the frame duplicate Guassian blur 3.00 and change the blend mode to Soft Light and add d/s to original tube layer.
Now Time To Add The Elements
I Used The Following
Brance 4 : 55% duplicate/mirror
Branch 6 : 55%
Clock : 80% and erase the excess chain
Tag 1 : 55%
Shrooms : 60%
Squirrel : 30% mirror
Acorn : 25% duplicate/mirror and cluster 
Flower 2 : 45%
Branch 3 : 35%
Branch 1 : 35% mirror
Birdhouse : 70%
Bird : 35%
Add anymore elements you wish and a dropshadow to each
When your happy with your tag close off your white background layer and merge visable resize by 95% all layers unchecked
Open paper 9 c/p apply mask/merge group resize by 106%
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!!