Saturday, March 31, 2012

Getting Ready For The Move


Well moving day is April 4th so as of April 3rd till April 7th i will be offline
i cant wait till its over so i can be settled and create again lol
the stress is killing me and i dont know how much more i can take 
Wish me luck and i will see you again soon
Hugs
Beth-Ann

Sunday, March 18, 2012

New Tag My Heart

Sharing a new tag I made with art by
ALEX
Soon to be released at

Saturday, March 17, 2012

Bluebird Extra's


A new set of Extras
Made with the awesome art of new artist
RICHARD FANG
And will be available for purchase soon at 
Artistically Inclined Licensing  ~ HERE




Friday, March 16, 2012

Snow White ~ PTU

*Click tag to see  full size*

**This Tutorial was written By Me On March 16, 2012
Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice
Dropshadow of choice
Mask #27 Horseplay's Pasture  ~ HERE
Template #162 By Kristin of Toxic Desirez ~ HERE

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the art of Lisa Cree and can be purchased at PSPTubeStop ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the beautiful PTU scrapkit Bella Note by Yarrow
And can be purchased ~ HERE

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize

*Let's Get Started*
Open template Shift+D close original, delete credits hearts, stars and words and dotted lines layers. Image Canvas size 625x625 then add a new layer and send to the botton and floodfill your background layer with white, we can crop later i just like enough room to work.

Rectangle : Select all/float/defloat new layer open paper 5 c/p into selection deselect then delete template layer.

Circle 1 : Select all/float/defloat new layer open paper 2 c/p into selection deselect then delete template layer.

Right Square : Select all/float/defloat new layer open paper 24 c/p into selection/deselect then delete template layer.

Left Square : Repeat same steps as you did for Right Square.

Circle : Select all/float/defloat new layer open paper 3 c/p into selection, open tube c/p resize when your happy invert/delete/deselect,duplicate guassian blur 4.00 change the blend mode to screen then, on your original tube layer lower the opacity to 80 or whatever looks best with your tube and add a d/s, delete template layer.

Now Time To Add The Elements
I Used  the following with a D/S unless otherwise stated:
Doodle Glitter 1 : arrange above your left square duplicate/mirror/flip.
Rose 2 : 50%
Rose 3 : 45%
Flower 2 : arrange under the red rose, duplicate then resize by 85% and place under the purple rose.
Key 5 : 45%
Butterfly 1 : 80% free rotate left 35
Heart 7 " 85% free rotate left 35
Add anymore elements you wish and add dropshadow of choice to all your elements and template layers
When your happy with your tag close off your white background layer and merge visable resize if needed.
Open paper 19 c/p apply mask/merge group 
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!


Watercolors ~ PTU

*Click tag to see  full size*

**This Tutorial was written By Me On March 16, 2012
Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice
Dropshadow of choice
Mask #12 by WeeScotLass  ~ HERE
Template #133 By Horseplay's Pasture ~ HERE

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the art of Keith Garvey and can be purchased at PTE ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the beautiful PTU scrapkit Watercolors by Designs By Sarah
And can be purchased ~ HERE

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize

*Let's Get Started*
Open template Shift+D close original, delete credits Image Canvas size 625x625 then add a new layer and send to the botton and floodfill your background layer with white, we can crop later i just like enough room to work.

Rectangle 1 : Select all/float/defloat new layer open paper 4 c/p into selection/deselect then delete template layer.

Rectangle 2 : Select all/float/defloat open paper 7 c/p resize by 75% invert/delete/deselect then delete template layer.

Rectangle 3 + 4 : Merge both rectangles together select all/float/defloat new layer open paper 1, c/p into selection deselect then delete template layer.

Circle back " Add noise Uniform/35/Monochrome Checked.

Circle : Select all/float/defloat new layer open paper 3 c/p into selection, open your tube c/p resize if needed position and when your happy invert and erase any part of the tube that hangs over the bottom of the circle deselect, duplicate tube guassian blur 5.00 and change the blend mode to Overlay then add d/s to original tube layer, then delete template layer.

Now Time To Add The Elements
I Used  the following with a D/S unless otherwise stated:
Yarn gems : 85%
Flower 2 : 40%
Button 2 : 40% free rotate right 35
Gemstone Clip : 50% free rotate left 45
Add anymore elements you wish and add dropshadow of choice to all your elements and template layers
When your happy with your tag close off your white background layer and merge visable resize if needed.
Open paper 3 c/p apply mask/merge group and resize your mask by 104% twice
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!


Thursday, March 15, 2012

Sexy And I Know It ~ PTU

*Click tag to see  full size*

**This Tutorial was written By Me On March 15, 2012
Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice
Dropshadow of choice
Mask #147 by Vix  ~ HERE
Template By Deanna from the Creative Misfits Blog  ~ HERE
We are using the template You Crack me Up

*Plugins Used*
Xenofex2-Constellation
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the art of Ismael Rac and can be purchased at his store ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the PTU scrapkit Sexy and I Know It by TammyKat
And can be purchased ~ HERE

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize

*Let's Get Started*
Open template Shift+D close original, delete credits and and the first 6 layers , Image Canvas size 700x700 then add a new layer and send to the botton and floodfill your background layer with white, we can crop later i just like enough room to work.

Oval layer : Select all/float/defloat new layer open paper 9 c/p into selection/deselect then delete template layer.

Circle Frame : Add noise Guassian/100/Monchrome Checked.

Circle : Select all/float/defloat new layer open paper 3 c/p into selection/deselect then delete template layer.
Square Frame background botton : Select all/float/defloat new layer open paper 2 c/p into selection, open tube c/p resize and arrange then invert/delete change the blend mode to Lumiance(L) add d/s delete template layer.

Square frame background top : repeat the same steps as you did for the previous background except mirror your tube.

Frame Layers : repeat the same noise as you did on the circle frame.

Add your main tube resize if needed duplicate guassian blur 5.00 and change the blend mode to screen and add d/s to original tube layer.

*Now Time To Add The Elements*
I Used  the following with a D/S unless otherwise stated:
Element 18 : 40% duplicate and resize again by 85%.
Element 26 : arrange then duplicate/mirror.
Wordart 1 : 70% free rotate right 35
Add anymore elements you wish and add dropshadow of choice to all your elements and template layers.
When your happy with your tag close off your white background layer and merge visable resize if needed.
Open paper 10 c/p apply mask/merge group apply Xenofex2-Constellation I used Small Stars Setting play around with the settings and find one you like best.
Open paper 4 c/p apply mask/merge group resize by 95% and make sure it is above your first mask layer and apply Xenofex_Constellation .
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!



Unlikely Ballad ~ PTU

*Click tag to see  full size*

**This Tutorial was written By Me On March 15, 2012
Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice
Dropshadow of choice
Template #127 By Horseplay's Pasture ~ HERE

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the art of Jose Cano and can be purchased at PTE ~ HERE
This is a PTU tube and you must have a license to use.

*Scrapkit Of Choice* 
I am using the beautiful PTU scrapkit Unlikely Ballad by Polka Dot Scraps
And can be purchased ~ HERE

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize

*Let's Get Started*
Open template Shift+D close original, delete credits and hearts layer, Image Canvas size 650x650 then add a new layer and send to the botton and floodfill your background layer with white, we can crop later i just like enough room to work.

Merge Rectangle 1 & 2 together select all/float/defloat new layer open paper 5 c/p into selection/deselect, delete template layer.

Thin Rectangles : select all/float/defloat new layer open paper 9 c/p into selection/deselect then delete template layer.

Dotted Rectangles : select all/float/defloat add new layer floodfill with white move back to the dotted rectangles invert/delete/deselect and delete template layer.

Circle 1 : select all/float/defloat add new layer, floodfill with black then add noise Uniform/75/Monochrome checked, deselect and delete template layer.

Circle 2 : select all/float/defloat new layer open paper 10 c/p into selection now take the close up of your tube and c/p invert/delete then change the blend mode to screen  and lower the opacity to 75 then delete template layer.

Open your main tube c/p duplicate guassian blur 5.00 and change the blend mode to Soft Light and add a d/s to the original tube layer.

Now Time To Add The Elements
I Used  the following with a D/S unless otherwise stated:
Frame 6 : move above your white background layer 
Element 13+14 " 50% duplicate element 13 mirror
Element 22 : 50% free rotate left 35
Element 3 : 50%
Element 16 : 50% mirror
Add anymore elements you wish and add dropshadow of choice to all your elements and template layers
When your happy with your tag close off your white background layer and merge visable resize if needed.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!


Sunday, March 11, 2012

Scrummy Love Extras ~ PTU

Some new extra's for you today
Featuring the awesome art of Irmino Pin-Oops!
and can be found for purchase at SATC ~ HERE
I used the awesome PTU kit Scrummy Love by Kirsty
Also avaiable at Scraps And The City ~ HERE








A Beautiful Twilight ~ PTU

*Click tag to see  full size*

**This Tutorial was written By Me On March 11, 2012
Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice
Dropshadow of choice
Mask 27 Horseplay's Pasture  ~ HERE
Template #52 By Yvette ~ HERE
Her templates are on the left under downloads.

*Plugins Used*
Xenofex2-Constellation
Tramages - Pool Shadow
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Beautiful art of Zindy S.D Nielsen this is a Free To Use tube and can be found here ~ HERE
Even tho this is a FTU tube you still must us a proper copyright.

*Scrapkit Of Choice* 
I am using the beautiful PTU scrapkit Swan Lake by Designs By Stina
And can be purchased at any of the stores she sells and and you can find those on her blog ~ HERE

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize

*Let's Get Started*
Open template Shift+D close original, delete credits and layer 5, resize template by 575x565 make sure all layers are checked then Image Canvas size 625x600 then add a new layer and send to the botton and floodfill your background layer with white, we can crop later i just like enough room to work.

Circle : Select all/float/defloat new layer, open paper 10 c/p into selection/deselect then delete add a fat white gradient glow, width 3.00 then template layer.

Rectangles : merge both together select all/float/defloat choose a color from your kit add new layer floodfill then apply Tramages-Pool Shadow default settings deselect then delete template layer.

Frame background : select all/float/defloat open paper 5 c/p resize by 85% and arrnage we just want the color part of the paper no any of the design, when your happy invert/delete, invert again and open your tube, position and resize if needed invert again then delete/deselect, now duplicate gussian blur 5.00 change the blend mode to screen and change the blend mode on the original tube layer to Lumiance(L), delete template layer.

Frame : Add a dropshadow

Now Time To Add The Elements
I Used  the following with a D/S unless otherwise stated:
Bow 5 : 70%
Butterfly 3 : 30% the free rotate left 25 
Feather 2 : 30% arrange behind your frame background layer , duplicate and arrange slightly offset.
Lantern 3 : 70% move behing the butterfly and erase the string that is above the butterfly.
Add anymore elements you wish and add dropshadow of choice to all your elements and template layers.

When your happy with your tag close off your white background layer and merge visable resize if needed.

Add new layer floodfill with a color to match your tag i chose a dark purple apply mask/merge group apply Xenofex2-Constellation I used Small Stars Setting play around with the settings and find one you like best., 
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!



Friday, March 9, 2012

Tragic Romance ~ PTU

*Click tag to see full size*

**This Tutorial was written By Me On March 9, 2012
Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice
Dropshadow of choice
Template Of Choice :  Template # 389 By Missy ~ HERE

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice*
 I am using the stunning art os Zindy S.D Nielsen and can be purchased at her store ~ HERE
This is a PTU tube please do not use without the proper license to do so .

*Scrapkit Of Choice* 
I am using the beautiful PTU scrapkit Tragic Romance By Pimped Designs
And can be purchased  ~ HERE

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize

*Let's Get Started*
Open template Shift+D close original, delete credits and the following layers Dotted Line,Wordart,Stars 1+2, 2011 and 2011back, Image Canvas size 700x550 then add a new layer and send to the botton and floodfill your background layer with white, we can crop later i just like enough room to work.

Raster 1 : Select all/float/defloat new layer open paper 6 c/p into selection/deselect then delete template layer.

Rectangle 1 : Select all/float/defloat new layer open paper 4 c/p into selection then open tube c/p resize by 85% and arrange just the male vampire inside the dotted lines invert/delete/deselect,Change the blend mode of your tube to Overlay and lower the opacity to 65,apply blinds with the following settings
Width - 4
Opacity - 15
Color - Black
Horizontal & Light from top - Checked 
then delete template layer. merge down the select all/float/defloat expand by 4 new layer and floodfill with dark red add noise/deselect and add a thin black gradient glow.

Rectangle 2 : repeat the same steps you did for the previous rectangle except so the female portion of the tube is inside the rectangle.

Center Rectangle : Select all/float/defloat new layer open paper 4 c/p into selection open tube resize and position invert/delete/deselect, duplicate tube guassian blur 5.00 and change the blend mode to soft Light add a dropshadow to original tube layer, now merge down your 2 tube layers, move to the rectangle again select all/float/defloat invert then move back to your tube and hit delete, this removes any of the excess from the blurred tube, deselect.merge together with your rectangle now select all/float/defloat expand by 5 floodfill with a dark red add noise deselect and move behind tour tube layers and delete template layer.

Now Time To Add The Elements
I Used the following and added d/s :
Ribbon 5 - 50% erase any part that hangs over.
leaves 1: 35% move behing the main rectangle duplicate/flip and arrange so there slightly offset, merge down duplicate again and mirror.
Key : 35% free rotate 35 left.
Butterfly : 30% free rotate 35/left.
Print 1 : move above your white background layer.
Music Sheet : 35% free rotate 35/right and move it behind the leaves on the right side.
Add anymore elements you wish and add dropshadow of choice to all your elements and template layers
When your happy with your tag close off your white background layer and merge visable resize if needed. 
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!


Thursday, March 8, 2012

St Patty's Extras

Some St Patty's Extra's
Using the amazing art of Wendy Gerber and can be purchased at
The PSP Project ~ HERE










Wednesday, March 7, 2012

Spring Love ~ PTU

*Click tag to see original size*

**This Tutorial was written By Me On March 7, 2012
Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice
Mask Of Choice : Vix BigMask01  ~ HERE
Dropshadow of choice
Template Of Choice :  Easter Template #9 by Tracy ~ HERE
Her templates are on the right under Tracy's Bulk Templates

*Plugins Used*
Eye Candy 4000 Gradient Glow For Name (Optional)

*Tube/s of Choice* 
I am using the Beautiful art of Elias Chatzoudis and can be purchased at PTE ~ HERE
This is a PTU tube please do not use without the proper license to do so .

*Scrapkit Of Choice* 
I am using the beautiful PTU Collab Spring Love from the Girls at PMTwS
We will be using bits and pieces from all 4 kits
And can be purchased  ~ HERE

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize

*Let's Get Started*
Open template Shift+D close original, delete credits and the following layers Text 1+2 and egg & tone, Image Canvas size 750x600 then add a new layer and send to the botton and floodfill your background layer with white, we can crop later i just like enough room to work.

Oval : Select all/float/defloat add new layer and open sprinlove yellow paper from Tammy's part c/p into selection/  Texture Effect Weave with the following settings 
Gap Size : 2
Width : 10
Opacity : 1
Weave & Gap Color : White
Fill Gaps : Checked
deselect and delete template layer.

Circle : Select all/float/defloat new layer, open paper 11 from Sarah's part c/p into selection deselect and delete template layer.

Rectangle : Select all/float/defloat new layer open paper 12 from Pimped Design's part c/p into selection, deselect and delete template layer.

Now Time To Add The Elements
I Used :
Bunny from Cora's part : 45%
Grass1 : from Polka Dot Scraps 65% move behind the bunny duplicate and move bahind your tube.
Flower : from PDS 50% move behind your rectangle layers, duplicate/mirror and arrange along side.
Flower1 : from PDS 55% and move behind the tube and cluster with the grass layer.
Bow 3 : from Sarah 60%
Flower5 : From PDS 85% position over your template layers and erase any part that is below your tube
Add anymore elements you wish and add dropshadow of choice to all your elements and template layers.

Add your main tube resize if needed, then duplicate guassian blur 5.00 and change the blend mode to screen and add d/s to original tube layer.
When your happy with your tag close off your white background layer and merge visable resize if needed.
Add new layer  open paper 10 from PDS c/p  apply mask/merge group, 
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!


Tuesday, March 6, 2012

Punked Up Extra's ~ PTU

A new set of Extra's featuring the awesome art of Zlata-M and this tube is exclusive to The PSP Project
and can be found  ~ HERE









Monday, March 5, 2012

Blue Devil Extra's

I have a new set of Extra's
Made with the awesome art of Freya Langford-Sidebottom and can be found at 
Artistically Inclined Licensing  ~ HERE









Saturday, March 3, 2012

Pearl ~ PTU

*Click tag to see original size*

**This Tutorial was written By Me On March 3, 2012
Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice
Mask Of Choice : I am using Becky mask22  ~ HERE
Dropshadow of choice
Template Of Choice : Template #52 by Creative By Nature ~ HERE

*Plugins Used*
Xenofex2-Constellation
Eye Candy 4000 Gradient Glow (Optional)

*Tube/s of Choice* 
I am using the Beautiful art of Rachel Anderson and can be purchased at CDO ~ HERE
This is a PTU tube please do not use without the proper license to do so .

*Scrapkit Of Choice* 
I am using the beautiful PTU kit Pearl by Polka Dot Scraps
And can be purchased  ~ HERE

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize

*Let's Get Started*
Open template Shift+D close original, delete credits and wordart layers, Image Canvas size 700x700 then floodfill your background layer with white, we can crop later i just like enough room to work.

Purple rectangle : select all/float/defloat open paper 12 c/p arrange invert/delete/deselect, delete template layer.

Merge Raster 4 and Copy of Raster 4 together : select all/float/defloat new layer and floodfill with a dark purple color deselect/delete template layer.

Square Frame : add noise 50/Gussian/Monochrome Checked add d/s.

Black Square : select all/float/defloat new layer open paper 3 c/ into selection deselect/delete template layer.

Pink Circle : select a;;/float/defloat open paper 5 c.p arrange invert/delete invert again open your tube copy and click somewhere in PSP paste as a new image then mirror c/p onto tag arrange invert/delete/deselect, change the blend mode to Overlay, delete template layer.

Circle Frame : Add noise 50/Gussian/Monochrome Checked add d/s.

Open tube c/p arrange duplicate guassian blur 5.00 change the blend mode to Soft Light and add d/s to original tube layer.

Now Time To Add The Elements
I Used :
Frame 4 : move behind your tube.
Element 21 : 60%
Element 1 : 35%
Element 4 : 45% free rotate left 35, duplicate/mirror/flip and tuck both behind the rose.
Element 25 :  mirror and move above your white background layer
Add anymore elements you wish and add dropshadow of choice to all your elements and template layers
When your happy with your tag close off your white background layer and merge visable resize if needed.
add new layer select all open paper 5 c/p  apply mask/merge group, resize by 95% the add Xenofex2-Constellation I used Small Stars Setting play around with the settings and find one you like best.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!



Dragon Wishes ~ PTU

*Click tag to see original size*

**This Tutorial was written By Me On March 3, 2012
Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice
Mask Of Choice : I am using WSL_Mask120  ~ HERE
Dropshadow of choice
Template Of Choice : Template #132 by Horseplay's Pasture ~ HERE

*Plugins Used*
Eye Candy 4000 Gradient Glow (Optional)

*Tube/s of Choice* 
I am using the simply adorable art of Lisa Victoria and can be found at UYA ~ HERE
This is a PTU tube please do not use without the proper license to do so .

*Scrapkit Of Choice* 
I am using the beautiful PTU kit Sleepy Time by Polka Dot Scraps
And can be purchased  ~ HERE

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize

*Let's Get Started*
Open template Shift+D close original, delete credits and overlay strip layer, Image Canvas size 650x650 then floodfill your background layer with white, we can crop later i just like enough room to work.

Rectangle 1 : Select all/float/defloat open paper 3 c/p resize by 60% invert/delete/delete template layer, add fat white gradient glow width 3.00 and add a 3rd tabe and make that a dark blue from your kit.

Rectangle 2 : Select all/float/defloat open paper 1 c/p resize by 70% invert/delete/deselect/delete template layer, add same gradient glow you used before.

Circle back : Select all/float/defloat expand by 4 add new layer and floodfill with the same dark blue you used in the gradient glow, deselect.

Circle : Select all/float/defloat move back to your floodfilled layer and tap the delete key we have just made a frame, we will come back to that later,

Back to the Circle layer  add a mew layer open paper 2 c/p into selection open tube c/p arrange inside the circle when your happy invert/delete/deselect, lower the opacity to 15 then apply blinds with the following settings
Width - 8
Opacity - 20
Color - Black
Light from top and horizontal - Both checked
Add a slight d/s and delte template layer.

Now back to the frame we made : Move it above your circle and tube layer add noise Random/50/Monochrome Checked and add d/s.

Now Time To Add The Elements
I Used :
Clouds : 55%
Wordart 1 : 65% add same noise as you did for the frame then a fat white gradient glow but dont add a 3rd tab, d/s and position.
Moon 1 : 60% mirror
Stars 1 : 65% mirror and arrange over yout tube and circle layer
Stars 2 : 45% duplicate then 80% arrange
Add anymore elements you wish and add dropshadow of choice to all your elements and template layers
When your happy with your tag close off your white background layer and merge visable resize if needed.
add new layer select all open paper 3 c/p  apply mask/merge group, resize by 115% then duplicate/merge down,
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!



Oh So Perfect ~ PTU

*Click tag to see original size*

**This Tutorial was written By Me On March 3, 2012
Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

*Supplies Needed*
PSP ( I Use 3X but should work with other versions)
Font of choice
Mask Of Choice : I am using VixBigMask001  ~ HERE
Dropshadow of choice
Template Of Choice : Template #103 By Kristin ~ HERE

*Plugins Used*
Xero-Radience
Xenofex2 - Constellation
Eye Candy 4000 Gradient Glow (Optional)

*Tube/s of Choice* 
I am using the awesome art of Keith Garvey and can be purchased at PTE ~ HERE
This is a PTU tube please do not use without the proper license to do so .

*Scrapkit Of Choice* 
I am using the beautiful PTU kit Perfect by Pimped Designs
This awesome kit is always $1.00
And can be purchased  ~ HERE

*NOTES*
Always remember to duplicate your tube and close the original
C/P means copy and paste as a new layer
D/s means Drop Shadow
Remember to sharpen after resizing
Resizing is always smartsize

*Let's Get Started*
Open template Shift+D close original, delete credits and bats layers, Resize size 700x470 then canvas size 800x650 then floodfill your background layer with white, we can crop later i just like enough room to work.
Rectangle : select all/float/defloat new layer open paper 11 c/p into selection deselect add a fat white gradient glow width 3.00 and the 3rd tab make black,delete template layer.

Oval 1 : select all/float/defloat new layer open paper 11 c/p into selection deselect/delete template layer.

Oval 2 : select all/float/defloat now move back to the black oval layer and tap delete, you should now have a frame now back to Oval 2 layer, open paper 8 c/p invert/delete/invert again now open your main tube c/p arrange invert again and take your eraser tool and erase just the bottom that is hanging over the martching ants, deselect/delete template layer.

Ok now highlight the frame we made move above your oval paper layer add noise Random/75/monochrome checked.

Highlight your tube duplicate guassian blur 5.00 change the blend mode to soft light, add dropshadow to original tube layer.

Frame back " select all/float/defloat new layer open paper 4 c/p into selection, open close up tube copy and click anywhere in PSP and paste as a new image then mirror, c/p  invert/delete/deselect,apply Xero-Radience default settings, duplicate guassian blur 5.00 chenge the blend mode to screen add d/s to original tube layer, delete template layer.

Frame 1 : repeat the same steps as you did for the frame we made.

Now Time To Add The Elements
I Used :
Flower 1 : resize by 85%  twice move behind the small frame layers.
Greens 2 : 85% 5 times tuck behind flower duplicate.flip, duplicate/flip/mirror and tuck behind the flowers.
Flower 6 : 85% 3 times, tuck behind other flower, duplicate flip position.
Butterflies : 75% and position over the flowers.
String 1 : Mirror
Button 2: 55%
Add anymore elements you wish and add dropshadow of choice to all your elements and template layers
When your happy with your tag close off your white background layer and merge visable resize if needed.
add new layer select all open paper 4 c/p into selection/deselect apply mask/merge group resize by 95%, Duplicate/merge down, apply Xenofex2 - Constellation, i used Small Stars Setting but play around until you find what you like.
Add your copyright, I add mine after i have resized it it keeps it crisp and clear.
Add your name in font of choice.
Save as a PNG and Your Done!