Wednesday, December 28, 2011

Happy New Year-PTU



*Click tag to see original size*

**This Tutorial was written By Me On December 28, 2011 Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

Supplies Needed:
PSP ( I Use 3X but should work with other versions)

No Tube used

Scrapkit Of Choice : I am using the Beautiful PTU Kit , Party Of the Year and PD11 CU New Years Pack
And can be found HERE
Thank You Cora for making such a fun  kit to create with :)

WSL_Mask 84 and can be downloaded HERE

Plugins Used
Eye Candy 4000 Gradient Glow (Optional)
Font of choice, I am using Inspiration
Dropshadow of choice

Let's Get Started
Open a new transparent image 650x650 
You can crop later, we want enough room to work

We will be using pieces from the kit and the CU pack

Open pd11 cu confetti 3,from the CU Pack. copy and paste as a new layer, resize by 85% smartsize,sharpen
open confetti from Party of the year, c/p as a new layer , resize by 90% smartsize, sharpen
Open Clock1 from the kit c/p as a new layer, resize by 50% smartsize , sharpen and move to the left of the confetti, add dropshadow
Open Flower2 from the kit, c/p as a new layer, resize by 70% smartsize, sharpen then move so it overlaps the clock, see my tag for placement
then duplicate/mirror add drop shadow 
Open pd11 cu-firework 2 from the CU pack. c/p as a new layer, add noise Uniform/45/Momochrome checked, then sharpen and move below your confetti layers.make sure this is above your mask layer.
Open pd11-glass from either the kit or CU pack, c/p as a new layer, resize by 80% smartsize, move ot so its above the flower and closk, see my tag for placement, add drop shadow.
Open wordart from the CU pack, c/p as a new layer, resize by 70% smartsize, then add gradient glow of choice, add dropshadow.
Add a new raster layer, send to the bottom, select all, open paper10,, c/p into selection/select none. Apply mask/merge group and lower the opacity to 80%.

When your happy with your tag merge visable, 
add copyright if you want to leave it as a snag your done , if not add your name

I Hope You Like This Tutorial

Saturday, December 24, 2011

Merry Christmas

Hello Everyone, I want to say Merry Christmas & Happy New Year, Be on the lookout for lots more tutorials from me in 2012!
Hugs & Love

Sunday, October 2, 2011

Dark Side ~ PTU



*Click tag to see original size*

**This Tutorial was written By Me On October 2, 2011 Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

Supplies Needed:
PSP ( I Use 3X but should work with other versions)

Tube/Image Of choice: I am using the fun artwork of Eugene Rzhevskii, HERE  This is a free tube but you MUST have and use your PFD license
 Please do not use  without the proper license to do so.

Scrapkit Of Choice : I am using the awesome Big Fan, by Pimped Designs
It is part of her awesome Birthday Bash Stash PU Bundle
And can be found HERE
Thank You Cora for making such a fun  kit to create with :)

Plugins Used
Eye Candy 4000 Gradient Glow (Optional)
Font of choice, I am using Star Jedi Logo
Dropshadow of choice

Let's Get Started
Open a new image 600x600 transparent
Open frame 3, c/p as a new layer, resize by 75% smartsize
Open frame 4, c/p as a new layer, resize by 75% smartsize, then free rotate 45/left, then resize again by 90
Open frame 2, c/p as a new layer, resize by 85% smartsize, rotate 25/left,sharpen and move toward the top of your tag,
click inside each frame with the magic wand expand by 5, open paper1, c/p as a new layer position and then invert/delete/select none
move paper behind your frame, 
click inside a frame opening again with your magic wand, and open your tube, c/p as a new layer resize as needed i did 50% smartsize and arrange part of your tube in your frame when your happy, invert/delete/select none
repeat same steps with the other 2 frames, and when done move behind your frame, then change the blend mode of your tube layers to what works best with your tube , i used Hard light, when done add dropshadow to your silver frame layer
Open starburst, c/p as a new layer arrange above your other layers
Open tube, c/p as a new layer resize as needed , i did 505 smartsize and arrange on your tag, duplicate, on duplicated layer gaussian blur 2.00 and change the blend mode to whatever suits your tube, i used overlay, add dropshadow to original tube layer
Open wordart, c/p as a new layer resize by 30% smartsize and move to the bottom left of your tag, see my finished tag for placement, add dropshadow
Add any other elements you like and when your done, merge visable
resize if needed then add copyright info and your name and your Done!


Tuesday, September 27, 2011

Spell On You ~ PTU



*Click tag to see original size*
**This Tutorial was written By Me On September 27, 2011 Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

Supplies Needed:
PSP ( I Use 3X but should work with other versions)

Tube/Image Of choice: I am using the beautiful work of Elias Chatzoudis, this tube was purchased at MPT when they were opened, but Elias's work can now be found at PTE HERE 
This is a PTU tube , Please do not use  without the proper license to do so.

Scrapkit Of Choice : I am using the awesome PTU Kit Witchy, by Pimped Designs
And can be found HERE
Thank You Cora for making such a fun  kit to create with :)


Plugins Used
Eye Candy 4000 Gradient Glow (Optional)
Dropshadow of choice
Wordart of choice or make your own 
Font Of Choice :
 For the Wordart I used LD Red Hatter's hand
Name : Parry Hotter

This will be another quickie :)

Let's Get Started
Open a 600x600 transparent image
Open bat_moon c/p as a new layer move toward the top of your tag
Open cauldron, c/p as a new layer, resize by 45 smartsize, sharpen and move to the bottom left of your tag add d/s of choice
Open ghost c/p as a new layer, resize by 65 smartsize 2 times, sharpen and move it so it looks like its coming out of the cauldron d/s of choice
Open cat c/p as a new layer, resize by 65 smartsize, sharpen and move to the bottom right of your tag, add d/s of choice
Open tube of choice, if your using the same one as i am move it so the wand is above the cauldron, then duplicate, adjust blur gaussian blur 2.00 and change the blend mode to one of your choice whatever looks best with your tube, i chose overlay
add d/s of choice to original tube layer
Add wordart of choice, or make your own, I did " I Put A Spell On You!" i alternated with orange and green, when your done add noise gaussian 45, then add gradient glow of choice. then d/s and position where you want.
Add any other elements you want, when your happy with your tag merge visable, resize if needed.
Then add your copyright and name and your done



Thursday, September 22, 2011

Halloween Sweets ~PTU



*Click tag to see original size*

**This Tutorial was written By Me On September 22, 2011 Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

Supplies Needed:
PSP ( I Use 3X but should work with other versions)

Tube/Image Of choice: I am using the beautiful work of Elias Chatzoudis, this tube was purchased at MPT when they were opened, but Elias's work can now be found at PTE HERE 
This is a PTU tube , Please do not use  without the proper license to do so.

Scrapkit Of Choice : I am using the awesome Sweetest Halloween Bundle, by Designs By Sarah
And can be found HERE
Thank You Sarah for making such a fun  kit to create with :)

Plugins Used
Eye Candy 4000 Gradient Glow (Optional)
Font of choice, I am using Ghostly Normal


Let's Get Started
This will be a quickie :)

Open a new 700x600 transparent image, we can crop/resize later, we want plenty of room to work with
Open frame 7, c/p as a new layer resize by 85 smartsize, sharpen
Click inside a frame with your magic wand,expand by 4, and choose a paper, c/p as a new layer, arrange, invert/delete/select none.
do the same for the other parts of the frame when done merge together and move behind your frame.Add dropshadow to your frame then merge frame and background together
Open Sweetest Halloween Cluster_Cluster4 , c/p as a new layer resize by 85 smartsize, sharpen and move to the bottom of your frame
Open frame 4, c/p as a new layer, resize by 70, smartsize , sharpen and move behind your background toward the bottom left, see my tag for placement,do the same with frame 5 but move it to the top right
Open Halloween tag c/p as a new layer, resize by 85 smartsize and place it on the left
Open tube, c/p as a new layer resize to fit your tag and place above the frame, duplicate tube and adjust blur,gaussian blur 2.oo and change the blend mode to Overlay.add dropshadow to original tube layer
Add drop shadow to your frame, cluster, and round frames and tag, when your happy merge visable resize or crop ,
Add your copyright and name and your done!!


Tuesday, September 20, 2011

Winter Blues ~PTU

*Click tag to see original size*

**This Tutorial was written By Me On September 20, 2011 Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

Supplies Needed:
PSP ( I Use 3X but should work with other versions)

Tubes choice: I am using the beautiful work of Anna Marine These tubes were purchased at CILM
when they were opened, But her stunning work can now be found at CDO HERE
This is a PTU tube , Please do not use  without the proper license to do so.

Scrapkit Of Choice : I am using the beautiful kit, Silent Night, by Grunge & Glitter
***NOTE THIS KIT IS NO LONGER FOR SALE BUT ANY SIMILAR THEMED KIT WILL WORK***

Plugins Used
Eye Candy 4000 Gradient Glow (Optional)
Xero-Porcelian
Font of choice, I am using InspriationROB


Let's Get Started

Open a new image 700x550. transparent, we can crop/resize later
Open frame 1, c/p as a new layer, resize by 80 then again by 80, smartsize, sharpen
Click inside each frame with your magic wand, make sure you get all the openings around the bow, expand by 7
Open paper 15, c/p as a new layer, resize by 80 smartsize, then invert/delete/select none, and move behind your frame
Choose your tubes, open them in PSP, Click inside the center frame and again make sure you also click inside the bows, expand by 7
c/p your tube,resize if needed, arrange then invert/delete/select none.
Do the same with the outer frames,
When your happy woth your tubes , apply Xero-Porcelian, default settings, and add dropshadow to your tubes.
Now merge your tube layers together, now activate your crop tool, and select the entire tag and click the middle, this will get rid of any excess tubes that didnt make the frame.
Now were going to dress up our tag, choose any elements you want
I chose these 

leaves,80 c/p resize, smartsize,sharpen, move behind your frame on the left side and take your eraser tube and erase the stem, duplicate/mirror, add dropshadow.
Clock,c/p, resize 50,sharpen, move to the bottom left of your frame, add dropshadow
Star 1, c/p resize 35 smartsize, sharpen, move so it overlaps the clock, add dropshadow
Tree 2, c/p resize 90, smartsize, and move to the left behind your leaves, now again take your eraser tool and erase any part of the tree that is below the frame, duplicate/mirror
When your happy with your tag, merge visable, crop as desired,
Add your copyright and your name and Your Done!!


Monday, September 19, 2011

Gothabilly ~PTU

*Click tag to see original size*

**This Tutorial was written By Me On September 18, 2011 Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

Supplies Needed:
PSP ( I Use 3X but should work with other versions)

Tube/Image Of choice: I am using the beautiful work of Screaming Demons And can be purchased at SATC
This is a PTU tube , Please do not use  without the proper license to do so.

Scrapkit Of Choice : I am using the awesome Gothabilly, by Pimped Designs
And can be found HERE
Thank You Cora for such a great kit to create with :)
Mask of Choice : i am using one of Vix's awesome Big masks , and can be found HERE.



Plugins Used
Eye Candy 4000 Gradient Glow (Optional)
Xero-Porcelian
Font of choice, I am using Banana


Let's Get Started

Open new 600x600 transparent image
Open frame 2, c/p resize by 85, sharpen . click inside with your magic wand, expand by 5
Open paper 4, c/p resize by 70, invert/delete/select none
Open close up of your tube, c/p, if your using the same one as i am resize by 85 mirror and arrange over your paper
click inside your frame with magic wand, invert/delete/select none, change the blend mode to overlay and lower opacity to 75
Open flower 1 c/p, resize by 45, sharpen.and move to the bottom left corner of your frame
Open hearts 1, c/p resize by 45, sharpen and move to the bottom right of your frame arrange so the hearts overhang a bit
open star 1, c/p resize by 50, sharpen, and move behind your hearts layer
Open skull, c/p resize by 45, sharpen and move to the top right of your tag
open main tube, c/p resixe as needed, sharpen, then duplicate, on duplicated layer apply Xero-Porcelian, default settings then change the blend mode to screen, add dropshadow to your original tube layer.
Open Wire, c/p resize by 85, sharpen and move behind your frame and bkg layer
Open paper 3 c/p send to bottom, resize by 85 apply Vix_BigMask004, merge group, add noise, Uniform, 35, Momchrome checked
open paper 8, c/p send to bottom resize by 85, apply mask again, and this time after you have merged the mask mirror, and add the same noise 
Add dropshadow to your frame and element layers,
when your happy with your tag, merge visable, resize if needed
Add your copyright and your name and your done!


Saturday, September 17, 2011

Rock On ~ PTU

*Click tag to see original size*

**This Tutorial was written By Me On September 12, 2011 Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

I am using PSP X3 but any version will work.

~Supplies Needed~

Tube Of choice: I am using the beautiful work of Elias Chatzoudis, And can be purchased from PTE HERE
This is a PTU tube , Please do not use  without the proper license to do so.

Scrapkit Of Choice : I am using the awesome Rock On, by Kristin of Toxic Desirez
And can be found HERE
Thank You Kristin for such a great kit to create with :)

Plugins Used
Eye Candy 4000 Gradient Glow (Optional) For Name
Font of choice, I am using Angelina


Let's Get Started
Open a new 600x600 transparent image,
Open scatter c/p resize by 80, sharpen
Open frame 2, c/p, resize by 85, move toward the bottom of the scatter, sharpen
click inside the frame with your magic wand, expand by 5, 
Open paper 2, c/p, invert/delete/select none, Move behind your frame.
Select your background layer, open paper 23, c/p resize by 85 , invert/delete/select none
make sure it is above your first background layer and change the blend mode to overlay.
Open Ipod, c/p resize by 30, sharpenmove to the bottom left of your tag.
Open cupcake, c/p, resize by 30, sharpen and move so it overlaps the ipod.
Open record, c/p and move behind the scatter.
Open buttons, c/p resize by 50, sharpen.and move to the bottom of your tag
Open note 3, c/p, resize by 50, sharpen and move to the top left of your tag.
Open sparkles, c/p arrange above all your elements
Open bow 5, c/p resize by 50 then again by 75, sharpen and move to the top right corner of your frame.
Open tube c/p arrange in the center, duplicate, on duplicated layer, adjust blur, gaussian blur, 2.00 and change the blend mode to suit your tube,
soft light, add dropshadow to original tube layer.
Open glitter scatter, c/p send to the bottom, move to the top then duplicate/mirror and move toward the bottom.
When your happy , add dropshadow to all your elements ,
Merge visable, resize if needed
Add your copyright and your name and
Your Done!


Hollywood Star~PTU

*Click tag to see original size*

**This Tutorial was written By Me On September 17, 2011 Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

Supplies Needed:
PSP ( I Use 3X but should work with other versions)

Tube/Image Of choice: I am using the beautiful work of Elias Chatzoudis This tube was bought from MPT when they were open , Elias's work can now be purchased at PTE
This is a PTU tube , Please do not use  without the proper license to do so.

Scrapkit Of Choice : I am using the beautiful kit Hollywood, by Pimped Designs
And can be found HERE
Thank You Cora for such a great kit to create with :)
Mask of Choice : i am using Vix_Mask41 , and can be found HERE.



Plugins Used
Eye Candy 4000 Gradient Glow (Optional)
Font of choice, I am using Ability Black


Let's Get Started

Open a new 600x600 transparent image
Open frame7 c/p, resize by 85, sharpen, click inside the frame with your magic wand, expand by 8
Open paper10, c/p resize by 85 2 times, invert/delete/select none, move it behind your frame layer
open stars2, c/p resize by 85 move to the left between your frame and background layer,duplicate/mirror, arrange then merge the 2 star layers down
then Select your background layer, select all, float/defloat,then invert/delete/select none.
Open reel1, c/p arrange to the right, make sure the reel layer is between your frame layer but above the stars.
again select your background layer, select all, float/defloat,then invert/delete/select none.chang thee blend mode to overlay
Open frame 6, c/p resize by 80 then again by 85, click inside the bigger frame openings with your magic wand, expand by 4,
Open paper 6, c/p , arrange then invert/delete/
Click inside the top frame of your filmstrip, c/p tube, resize if needed,arrange, when invert/delete/select none, then duplicate the tube layer,
mirror and move to the 2nd frame, duplicate the top tube layer again and move to the bottom frame, merge all 3 tube layers together
move below your filmstrip layer and change the blend mode to Lumiance (L)
Then add a fat white gradient glow to your filmstrip 
Open your main tube, c/p arrange, then duplicate, add blur gaussian 2.00 and change the blend mode to suit your tube, i used overlay
add dropshadow to original tube layer

Add the elements you want to 
I used
Reel 2-resized by 50 the again by 80
Award - Resize by 50 then again by 70
when your happy with your tag add dropshadow to your layers,
Open paper5, c/p, move to bottom, apply Vix Mask 41, merge group,
Open sparkles , c/p and arrange them over your tag

When your happy merge visable, resize if needed 
Add your copyright and name and your done!



Wednesday, September 14, 2011

STEFAN~PTU

*Click tag to see original size*

**This Tutorial was written By Me On September 14, 2011 Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

Supplies Needed:
PSP ( I Use 3X but should work with other versions)

Tube/Image Of choice: I am using the beautiful work of Moonflower, and can be purchased at My Tubed Art HERE
This is a PTU tube , Please do not use  without the proper license to do so.

Scrapkit Of Choice : I am using the awesome kit Stefan by Polka Dot Scraps
 It is part of her awesome Vampire Diaries Collection
And can be found HERE
Thank You Chassity for such a great kit to create with :)

Mask of Choice : i am using one WSL_Mask81 , and can be found HERE.



Plugins Used
Eye Candy 4000 Gradient Glow (Optional)
Xenofex-Constellation
Font of choice, I am using Lourdes
Dropshadow of choice


Let's Get Started

open a new 600x600 transparent image
Open frame2, c/p resize by 90, sharpen, click inside with your magic wand, expand by 6
Open tube, i am using the image that came with the tube, c/p resize by 90,sharpen, position, when your happy
invert/delete/select none and move behind your frame.
Open string 1, c/p and position over the bottom of the frame
Open glow1 c/p move behind your frame and image, position at the top, duplicate/mirror/flip
Open charm1, c/p resize by 50,then again by 90,sharpen and position over the button on your string
Open ribbon3, c/p resize by 75,mirror, sharpen and place over the link to the charm
Open ribbon2, c/p amd move above your button string layer
Open paper4, c/p resize by 80,send to the bottom apply WSL_Mask81, merge group,
Apply Xenofex-Constellation, with the following settings
small star, 2.00,10,10,100.75. keep original image checked, click ok
Add dropshadow to all your elements and frame
when your happy merge group, resize if needed,
Add your copyright and your name and Your Done!










Tuesday, September 13, 2011

Lost Soul~PTU

*Click tag to see original size*

**This Tutorial was written By Me On September 13, 2011 Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

Supplies Needed:
PSP ( I Use 3X but should work with other versions)

Tube/Image Of choice: I am using the beautiful work of Screaming Demons And can be purchased at SATC HERE
This is a PTU tube , Please do not use  without the proper license to do so.

Scrapkit Of Choice : I am using the awesome Lost Soul, by Pimped Designs
And can be found HERE
Thank You Cora for such a great kit to create with :)
Mask of Choice : i am using one of Vix's awesome Halloween masks , and can be found HERE.



Plugins Used
Eye Candy 4000 Gradient Glow (Optional)
DSB-Flux Bright Noise
Font of choice, I am using Creepsville


Let's Get Started

Open 600x600 transparent image
Open frame4 c/p as a new layer, resize by 85,sharpen, move frame downtoward the bottom of your tag
Click inside your frame with your magic wand/expand by 6
Open paper1, c/p as a new layer arrange then invert/delete/select none, move behind your frame layer.
Open lightning c/p, resize by 85, image / mirror, move to the left of your tag between the frame and paper layer,
duplicate and move down slightly, see my tag for placement, then take your eraser tool and erase anything that is outside your frame.
merge lightning together then duplicate/mirror.
Open tube,  c/p, resize/sharpen then position above the frame but make sure the bottoms line up,
open bats, c/p resize by 80 and move behind your tube to the left.
Open spider, c/p resize by 80 2x, mirror and then place at the bottom right of your frame.
Open paper6, c/p send to the bottom,resize by 90. apply Vix_Halloween2010No10 mask/merge group,duplicate then merge down,
Add DSB Flux-Bright Noise, Intensity-80, Mix checked
Add dropshadow to all your elements, except the lighning.
When your happy with your tag, merge visable, resize if needed 
Add your copyright and your name and Your Done!


Elegant Feather's Forum Set~PTU


*Click on tag to see full size*

**This Tutorial was written By Me On September 13, 2011 Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

Supplies Needed:
PSP ( I Use 3X but should work with other versions)

Tube/Image Of choice: I am using the stunning artwork of Barbara Jensen, this is an exclusive tube for Scraps N Crap
and can be purchased HERE,please only use if you have a license to do so.

Scrapkit Of Choice : I am using the beautiful kit Glitter Fairy By Pink Candy Designs
And can be found HERE
Thank You Aurelie for such a pretty kit to play with :)

Plugins Used
Eye Candy 4000 Gradient Glow (Optional)
Mura Miester Copies
Font of choice, I am using Musica Swash


Let's Begin!

Open a new image 600x250, transparent

Open paper6 c/p as a new layer arrange where you like it, then crop to the size of the tag.
Open your tube and apply Mura Miester copies, wallpaper/rotate and change the number to 9, (this all depends on what tube your using)
change the blend mode to overlay,(play with the modes and choose one that works best with your tube)
and lower the opacity to 40, or whatever works best for your tube.
Open element32 c/p as a new layer move to the left and then duplicate/mirror and move a bit to the right.
Open element 19 c/p as a new layer, resize by 85 sharpen.and move toward the top pf your tag.
Open element15, c/p as a new layer and move to the right position where you like then duplicate/mirror.
Open element17 c/p as a new layer. resize by 85, center in the middle of your tag.sharpen
Open tube and c/p as a new payer, resize if needed and place over the feather fan, duplicate and on duplicated image apply blur/gaussian blur 2.00
and change the blend mode to overlay or whatever works for your tube.apply dropshadow of choice to original tube layer.
Apply dropshadow to your elements

We are going to do the avatar now then go back to the tag
Open a new 150x150 and copy layers from your tag. i used the paper, copied tube, and the spray and feather element, but use what ever you like.
copy and paste your tube, resize to fit your avatar and move to the left, and repeat with your tube as you did with the tube for the tag.
when your happy merge visable, select all/contract by 5,invert and make a gradient from colors in your tube i chose a blue and white,
I chose foreground/background angle : 45,Repeats : 5 and invert checked.
add new raster layer and floodfil with your gradient,select none then add noise, Uniform/75.
Add dropshadow to your noise layer , merge visable.
Now back to the forum tag
merge visable,select all/contract by 8, invert, add new raster layer and floodfil with the gradient, and repeat as you did with the avatar. merge visable.
Add your copyright and name and your done.



Monday, September 12, 2011

Welcome To My World~PTU

*Click tag to see full size*

**This Tutorial was written By Me On September 12, 2011 Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

Supplies Needed:
PSP ( I Use 3X but should work with other versions)

Tube/Image Of choice: I am using the beautiful work of Elias Chatzoudis
These tubes were bought from MPT when they were opened, Elias' work can now be purchased at PTE
This is a PTU tube , Please do not use  without the proper license to do so.

Scrapkit Of Choice : I am using the awesome Haunted kit by Designs By Sarah, From Pimp My Tags With Scraps
And can be found HERE
Thank You Sarah for such a fun kit to play with :)

Mask of Choice : i am using VIX_halloweenMask0904
And can be found HERE

Plugins Used
Eye Candy 4000 Gradient Glow (Optional)
Font of choice, I am using Blood Omen for the wordart & Yataghan for the  name


Let's Get Started
This will be a fairy quick one , however you can make it as complex as you want to ,

Open a new image 800x500 transparent
Open frame 5 c/p as a new layer,click inside each frame with your magic wand, expand by 6,
open paper 6 c/p as a new layer, invert/delete/select none, move behind frame layer.
Open your tube  resize if needed and place where you like it., when your happy with placement,
duplicate tube and on duplicated layer adjust/blur/gaussian blur 2.00 and change the blend mode to whatever suits your tube, i used Overlay
Open paper 4, c/p resize by 110 2 times, apply mask/merge group, move behind your frame background layer
Now its time to dress it up!
Open elements of choice I used
Haunted Wire
Haunted Spider
Broken Glass
resize elements of needed

When your happy with your finished tag,merg visable, resize if needed , Add proper copyright and your name and your done!




Friday, September 9, 2011

You Are My Life Now ~ PTU

*Click tag to see full size*
**This Tutorial was written By Me On September 8, 2011 Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

Supplies Needed:
PSP ( I Use 3X but should work with other versions)

Tube/Image Of choice: I am using a FTU by Zindy S.D. Nielsen
and can be downloaded HERE, scroll down and its about halfway down
*Even tho it is a free tube , you must use the proper copyright, please consult Zindy's terms

Scrapkit Of Choice : I am using the beautiful kit, LONESOME by Polka Dot Scraps
It is a PTU kit and can be avaiable at Pimp My Tags With Scraps HERE

Wordart of choice : I am using a Twilight themed wordart, I cannot remember where i got this, if this is yours please let me know so i can give proper credit.

Let's Begin !

Open a new 600x600 transparent image, open frame 6 , c/p as a new layer.
Click inside each frame with your magic wand, expand by 4,
Open paper 4 c/p, resize by 70, invert/delete/select none.
Open tube in PSP,if your using the same tube as i am resize by 85, sharpen.
then take your eraser tool and erase any part of the tube hanging out of the frame, be careful not to erase any part that is inside your frame.
Change the blend mode to Lumiance (L) and lower the opacity to 85.
Open element 41, c/p, resize by 60,sharpen, move to the bottom right corner of your frame,
Open element 42, c/p resize by 45, move beside the white flower, see my tag as a guide, duplicate/mirror and move to the other side of the white flower,sharpen and add dropshadow to each flower, then merge all flowers together , duplicate/mirror/flip, and resize by 70 and place at the top left hand corner of your frame.
Open element 34, c/p. resize by 45, sharpen, and place above the flowers on the bottom right.
Open element 45, c/p and move behind your frame background layer
Open your wordart c/p, resize, re-color to match your tag if you want to.
When your happy with your tag, merge visable, resize if needed.
Add your copyright and your name and your done!

Emo-Me ~PTU

*Click tag to see full size*

**This Tutorial was written By Me On September 8, 2011 Any resemblance to other tutorials is not intended this tutorial is my creation only**

This Tutorial is intended for those that have a working knowledge of PSP

Supplies Needed:
PSP ( I Use 3X but should work with other versions)

Tube/Image Of choice: I am using the stunning art of VERYMANY and can be purchased at
PFD, you will need 2 -3 tubes 
This is a PTU tube , Please do not use  without the proper license to do so.

Scrapkit Of Choice : I am using the awesome PTU kit Emo Rock  By Rebellious Scraps and can be purchased at Scrappin Dollars
Thank You Sandrine for such a fun kit to play with


Plugins Used
Eye Candy 4000 Gradient Glow (Optional)
Font of Choice  :  I am using 2Peas Fragile

Let's Get Started!

open a new image 600x600, transparent
open frame 5, c/p as a new layer, resize by 75,sharpen.
Click inside with your magic wand, expand by 6.
Open paper 5, c/p as a new layer, invert/delete/select none
Move behind your frame.
Open frame 4 , Your filmstrip, c/p as a new layer, resize by 80, sharpen
Click inside each frame opening, expand by 3, open paper 11 c/p as a new layer
invert/delete select none, move below your filmstrip layer
Add gradient glow of choice to your filmstrip,
Click inside the first frame, expand by 3, c/p one of your tubes, resize as needed,
and arrange in your frame, when your happy , invert/delete/select none.
Image duplicate then mirror, 
Repeat the same steps for the 2nd frame.
When your done merge all your tube layers together, and move between your filmstrip layer and background layer, and change the blend mode to Lumiance(L),then duplicate tube layer again,adjust blur gaussian blur 2.00, and change the blend mode to overlay, add drop shadow to your original tube layer and filmstrip layer.
Close of the round frame and round bkg layer, and merge visable
unhide the other layers,
On your filmstrip layer, image free rotate, left 25 and arrange over your round frame, use my tag as a guide.
Open sparkles 2, c/p as a new layer arrange over your frame layers, duplicate image/mirror/flip
arrange at the bottom of your frames.
Open wire 1, c/p as a new layer, resize by 70, sharpen.and send to bottom and arrange to the top right of your tag, behind your round frame layers, do the same for wire 2, except move this to the bottom left, 
Open main tube, resize as needed and position, duplicate, adjust blur, gaussian blur 2.00 and change the blend mode to soft light, or whatever looks best with your tube, add dropshadow to your orignal tube layer.
Now add elements of your choice:
I used
Skull2 - resize by 20
Sad Teddy - resize by 25
Sneaker - resize by 20
Skull Polish - resize by 25
Add any other elements you like and then add dropshadow to all and your round frame layer
when your happy with your tag merge visable, resize if needed,
Add your copyright and name and your done!

Thank you for trying my tutorial.